Fill the tank with fresh water and insert it back in the appliance.
Place a sufciently large bowl (about 0.5 l) under the spout (g. 1/E) and press the rotary control.
The system is now being rinsed. The display shows “FILTER RINSES”.
After a short while no more water is dispersed from the spout.
The system reheats and the appliance is ready for use again. The display shows the main menu.
Attention: The lter needs changing after a maximum of two months if the appliance is not in regular
use. The display will show no status message. Use the dial (by the month) at the top of the lter to
select the date of change.
5.9. Maintenance status
The appliance will show you if cleaning or descaling are imminent.
Turn the rotary control to “MAINTENANCE” and press it.
Turn the rotary control to “MAINTENANCE STATUS” and press it.
The display shows:
“CLEANING SYSTEM”
“CLEANING LATER”
“DESCALING”
“CHANGE FILTER”
The respective bar will show you if cleaning or descaling are imminent. The further to the right it pro-
gresses, the sooner one or both need to be done.
Note: Please clean and descale regularly, at the latest when the display asks you to! Otherwise your
warranty could be compromised.
6. System reports
Report Cause Solution
Fill system Rell pipe system Press rotary control
Filter possible defect Remove or replace lter
(see 5.8.)
Fill water Water tank is empty Fill water tank
Water tank not inserted or
inserted incorrectly
Reinsert water tank
correctly (see 2.3.)
Fill beans No beans Fill beans
(see 2.3.)
Beans stick Stir beans with a spoon
Clean bean container with
a cloth
Note: The display „FILL BEANS” only goes out after the next cup of coffee!
Empty trays Drip tray and/or used coffee
container full or contacts damp
Empty drip tray and/or used
coffee container, clean and
dry contacts
No trays No drip tray with used coffee
container or incorrectly in-
serted or contacts are damp
Reinsert drip tray with used
coffee container
Clean and dry contacts
Cleaning necessary System cleaning necessary Clean system (see 5.4.)
Descaling necessary System descaling necessary Descale system (see 5.5.)
Change lter Filter exhausted Change lter (see 5.8.)
Brew unit missing Brew unit tted incorrectly Fit brew unit correctly und
snap into place (see 5.7.)
56 57
5. Cleaning and maintenance 6. System reports
