© 2015 UTC Fire & Security Americas Corporation, Inc. All rights reserved. 31
• IP Address: ____.____.____.____
• Gateway: ____.____.____.____
• Subnet Mask: ____.____.____.____
• Primary DNS (if applicable): ____.____.____.____
• Secondary DNS (if applicable): ____.____.____.____
You must enter these settings via the NetworX keypad. Enter program mode on the
keypad and enter device address 191.
Step 1: Turn off DHCP.
1. Enter location 19.
2. Disable option 1.
Step 2: Manually enter network settings.
1. Enter location 20 (Gateway IP address).
a. There are four segments associated with the Gateway IP address
(Router IP address). Example address is shown below:
i. Segment 1: 192
ii. Segment 2: 168
iii. Segment 3: 1
iv. Segment 4: 1
2. Enter location 21 (IP address).
a. There are four segments associated with the IP address (NX-595E IP
address). Example address is shown below:
i. Segment 1: 192
ii. Segment 2: 168
iii. Segment 3: 1
iv. Segment 4: 100
3. Enter location 22 (Subnet Mask).
a. There are four segments associated with the Subnet Mask. Example
Subnet Mask is shown below:
i. Segment 1: 255
ii. Segment 2: 255
iii. Segment 3: 255
iv. Segment 4: 0
4. Enter location 23 (DNS Server 1).
a. There are four segments associated with the DNS Server. Example
DNS Server is shown below:
i. Segment 1: 192
