493495
16
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
ABOUT THE ON-SCREEN DISPLAY (OSD)
The T 757 employs a simple, self-explanatory system of on-screen display
“menus that will appear on the connected video monitor/TV. These are
required during the setup process (and are useful in day-to-day operation),
so be sure to connect the monitor/TV before proceeding with the setup.
DISPLAY THE OSD
Press [S], [s], [MENU] or [ENTER] buttons of the AVR 4 remote control or
front panel to display the T757’s Main Menu on your video monitor/TV. If
the OSD does not appear, check your MONITOR OUT connections.
NAVIGATING THE OSD AND MAKING CHANGES
To navigate through the OSD menu options, please do the following using
the AVR 4 or corresponding front panel buttons:
1 Press [ S ] to select a menu item. Use [ D/F ] or in some cases, [ENTER],
to move up or down the Menu selections. Repeatedly press [ S ] to
advance or go further into the sub-menu of desired menu item.
2 Use [ D/F ] to set or change the parameter value (setting) of a menu item.
3 Press [ A ] to save the settings or changes done on the current menu or
sub-menu. Pressing [ A ] will also return the user to the previous menu
or exit from a particular menu.
MAIN MENU
The Main Menu contains the menu options for “Listening Mode”, “DSP
Options”, Tone Controls”, “Zone Controls and access to “Setup Menu”.
Follow the guidelines about “DISPLAY THE OSD” and “NAVIGATING THE OSD
AND MAKING CHANGES” to navigate through the menu options and their
sub-menu selections.
NOTE
The individual congurations set forth at “Listening Mode”, “DSP
Options” and “Tone Controls” are carried over whenever they are
enabled at A/V Presets setting. Please see the section “AV PRESETS” for
reference.
LISTENING MODE
The T 757 oers distinct listening modes, tailored for dierent types of
recording or program material. With a two-channel (Stereo) source, the
following listening modes can be selected.
STEREO
Output is directed to the front left/right channels. Low frequencies are
directed to the subwoofer if one is present in the Speaker settings. Select
“Stereo when you wish to listen to a stereo (or monaural) production, such
as music CD or FM broadcast, without surround enhancement. Stereo
recordings whether in PCM/digital or analog form and whether surround-
encoded or not encoded, are reproduced as recorded. Multi-channel digital
recordings (Dolby Digital and DTS) are reproduced in “Stereo Downmix”
mode via the front left/right channels only as Lt/Rt (left/right-total) signals.
DIRECT
The analog or digital sources are automatically played in their native
formats. All the source’s audio channels are reproduced directly. This
mode recreates the original sound most faithfully thereby producing
outstandingly high quality audio. Note that the source must be at playback
mode for “Direct” to become available as a listening mode option. In order
to automatically playback your source in their native format, implement the
following settings.
1 Go to “Listening Mode Setup under “Setup Menu”. At the “Listening
Modes” menu, set all Dolby, DTS, PCM and Analog settings to “None”.
With this setup, your source will be played back directly at its native
format.
2 Next, go to A/V Presets” under “Setup Menu”. At A/V Presets menu, set
“Listening Mode” item to “Yes and then save this setting among other
options, say to “Preset 1”, by selecting “Save Current Setup to Preset”.
3 Now, you can associate “Preset 1” to any of the “Source” settings. For
example, at Source 1 setting under “Source Setup (Normal View)”, scroll
down to A/V Preset” item and set it to “Preset 1”. Thus whenever Source
1 is selected, the associated source will always be directly played back at
its native audio format.
PRO LOGIC
Two-channel recordings, whether stereo or surround-encoded, are
reproduced with Dolby Pro Logic surround processing, yielding output to
front left/right, center and discrete left/right surround channels (assuming
these are present in the current “Speaker Conguration”). The surround
channel is monophonic, but it is reproduced in both surround speakers.
OPERATION
USING THE T 757  MAIN MENU
16
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
16

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

NAD-T-757

Zoeken resetten

  • Ik heb nu al enkele malen meegemaakt dat het volume volle bak aangaat uit zichzelf, dit is niet zomaar hard maar super hard. Ik heb toen op de uit knop gedrukt maar deze sprong 2 seconden later uit zichzelf weer aan.
    Ook heb ik het een keer gehad dat ik het zachter wilde zetten door aan de volumeknop te draaien, deze volumeknop gaf echter zoveel weerstand dat ik de knop met 2 handen moest terugdraaien, maar er bleef weerstand op zitten en moest weer heel de stroom eraf halen
    Weet iemand hier de oorzaak van maar vooral hoe is dit te voorkomen ( ik kan nu niet meer de radio aanlaten als ik bijvoorbeeld even naar de winkel moet) Gesteld op 15-1-2022 om 10:34

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD T 757 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD T 757 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van NAD T 757

NAD T 757 Gebruiksaanwijzing - Nederlands - 44 pagina's

NAD T 757 Gebruiksaanwijzing - Deutsch - 44 pagina's

NAD T 757 Gebruiksaanwijzing - Français - 44 pagina's

NAD T 757 Gebruiksaanwijzing - Italiano - 44 pagina's

NAD T 757 Gebruiksaanwijzing - Português - 44 pagina's

NAD T 757 Gebruiksaanwijzing - Espanõl - 44 pagina's

NAD T 757 Gebruiksaanwijzing - Svenska - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info