Handleiding Multiplex ROYALevo7 (pagina 55 van 77) (Engels)

30268

Verklein

Vergroot

Pagina terug

1/77

Pagina verder

ROYAL evo 7

Page 54

Step s Setting up mixers

Mixers are set up in Menu G Mixer. This menu is dy-

namic, i.e. only those mixers used in the model are dis-

played. Mixer types and their function are described in

detail in the section on model templates (Î20.).

By default the mixers are assigned sensible average set-

tings for the model template in use, but they still have

to be fine-tuned to suit your particular model.

Details on the subject “setting up mixers” can be found

in the Mixer section (Î 15.4.).

Step

t Setting up the transmitter controls

Transmitter controls are set up in Menu H Control.

This menu is dynamic, i.e. only the controls required for

your model / model template are displayed. By default

the control settings are assigned sensible values for the

model template you have selected, but they still need to

be fine-tuned to suit your particular model.

All you need to know on the subject “Setting up trans-

mitter controls” can be found in the Section Î 14.

Step

u Pre-flight checks

Your newly set-up model should now be ready to fly.

But be sure to check all the working systems carefully

before you attempt to fly it.

Fine-tuning, especially of mixers and transmitter control

settings, can only be carried out during the test-flying

procedure with the new model. Please don’t try to make

changes in a menu while the model is flying. It is far

safer and more convenient to use the 3D digi-adjustors

to alter the values (Î 10.2.2.).

Step

v Activating flight phases

If you have set up a model based on one of the model

templates

BASIC2 ... 4 FLAPS, you can optimise the

model’s settings for various flight tasks by switching to

other flight phases. Before activating additional flight

phases the model should first be test-flown and

trimmed out properly in one flight phase (generally the

NORMAL phase), and all mixer and transmitter control

settings finalised. Only then should you activate addi-

tional flight phases as required, in order to optimise the

model for different flight situations, such as landing /

aerobatics, thermal / speed, cruise / auto-rotation. An-

other flight phase has first to be released, and then the

settings can be copied from the first flight phase to the

new one. The transmitter control settings (Menu H

Control

Î 14.) can now be optimised for the new

flight phase. All transmitter control settings which are

marked with a small number (

1 …3 or 4) can be ad-

justed separately for each flight phase.

You will find all you need to know about flight phases in

the Section Î 18.4.

19.3. A new model helicopter

! Safety note

Radio-controlled model helicopters are technically so-

phisticated and demanding flying machines which re-

quire careful setting-up, maintenance and care. If oper-

ated incompetently or carelessly they represent a seri-

ous potential hazard.

If you are a beginner, this is our advice:

x Start by asking an experienced model pilot for help;

join a club, or enrol at a model flying training centre;

x Ask your local model shop for advice;

x Read all you can on the subject (books, magazines).

Step

n Setting up a new memory

A new model is initially set up in Menu I Memory, in the

New Model sub-menu (Î 18.6.).

In this menu the following happens:

1. The first empty memory is automatically selected

for the new model.

(

Memory No. parameter Î 18.6.1.)

2. Select one of the two helicopter model templates

(

Template parameter Î 18.6.2.)

HELImech

For models with mechanical rotor

head mixing

HELIccpm

For models with electronic rotor head

mixing (CCPM). The type of swash-

plate (e.g. 3-point 120q, 3-point 90q,

...) is irrelevant. The settings for your

particular swashplate type will be en-

tered later.

A detailed description of the helicopter model

templates can be found at Î 20.

3. Select the manufacturer-specific servo sequence at

the receiver (from MULTIPLEX, HiTEC, Futaba or JR)

(

Servo config. parameter Î 18.6.3.)

4. Select your preferred stick mode, i.e. which stick is

to control which model function (e.g. collective

pitch right or left, roll right or left, …)

(

Mode parameter Î 18.6.4.)

5. Leave the menu by selecting

 this completes setting up the new model.

6. In the Control sub-menu of the Setup menu, select

the control neutral settings for:

Coll. min Control setting for negative

collective pitch

Thr.limit min Idle setting

(Î 13.3.3. and 13.3.4.)

Step

o Entering a model name

Enter the model’s name in the menu:

Memory / Properties.

(

Name parameter Î 18.5.6.)

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Multiplex ROYALevo7 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Multiplex ROYALevo7

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info