749026

Mr Safe IP camera - PC software Windows Handleiding

13
Verklein
Vergroot
Pagina terug
1/67
Pagina verder
FULL MANUAL
PC SOFTWARE
GB - NL
1. PARTS & FUNCTIONS .......................................................................................................................................................... 2
2. GETTING STARTED .............................................................................................................................................................. 3
2.1. CONNECTING THE DEVICE ......................................................................................................................................................... 3
2.2. SOFTWARE INSTALLATION ........................................................................................................................................................ 6
3. TERMINOLOGY ................................................................................................................................................................... 7
4. WIFI SETTINGS ................................................................................................................................................................... 8
5. LAN CAMERA ..................................................................................................................................................................... 9
5.1. LAN CAMERA BROWSING ........................................................................................................................................................ 9
5.2. LAN CAMERA SETTINGS ......................................................................................................................................................... 10
5.2.1. Setting options ........................................................................................................................................................ 10
5.2.1.1. Change the device alias ......................................................................................................................................................... 10
5.2.1.2. Set the IP address .................................................................................................................................................................. 11
5.2.1.3. Set recording schedule .......................................................................................................................................................... 11
5.2.1.4. Restore to factory default settings ........................................................................................................................................ 12
5.2.1.5. Device restart......................................................................................................................................................................... 12
5.2.1.6. E-mail alerts ........................................................................................................................................................................... 12
5.3. GROUP MANAGEMENT.......................................................................................................................................................... 13
6. WAN CAMERA .................................................................................................................................................................. 14
6.1. WAN LOGIN ....................................................................................................................................................................... 14
6.2. WAN CAMERA BROWSING .................................................................................................................................................... 15
6.3. WAN CAMERA SETTINGS ....................................................................................................................................................... 16
6.3.1 Setting options ............................................................................................................................................................ 17
6.3.1.1. Add device ............................................................................................................................................................................. 17
6.3.1.2. Change ACCESS CODE ............................................................................................................................................................ 17
6.3.1.3. Change the device alias ......................................................................................................................................................... 17
6.3.1.4. SD Card file download (Only for HD IP cameras) ................................................................................................................... 18
6.4. GROUP MANAGEMENT.......................................................................................................................................................... 18
7. MENU INSTRUCTIONS ...................................................................................................................................................... 19
7.1. MAIN MENU ........................................................................................................................................................................ 19
7.2. CONTROL PANEL .................................................................................................................................................................. 24
7.2.1 Settings........................................................................................................................................................................ 26
8. CAMERA MANAGEMENT .................................................................................................................................................. 27
8.1. CAMERA SETTINGS ................................................................................................................................................................ 27
8.2. DEVICE MANAGEMENT .......................................................................................................................................................... 29
9. ALARM SETTINGS ............................................................................................................................................................. 30
9.1. ALARM MANAGEMENT .......................................................................................................................................................... 30
9.2. LOCAL ALARM ALERTS ........................................................................................................................................................... 30
10. USE OF MICRO SD CARD (ONLY FOR HD IP CAMERAS) ................................................................................................. 31
10.1. PLACING THE MICRO SD CARD................................................................................................................................................. 31
10.2. CONFIGURATION OF THE CAMERA FOR USE WITH MICRO SD CARD .................................................................................................. 31
10.3. SD CARD QUERY ................................................................................................................................................................... 31
10.4. USE OF THE FTP SERVER ........................................................................................................................................................ 32
11. CUSTOMER SERVICE ..................................................................................................................................................... 32
12. LEGAL DISCLAIMER ...................................................................................................................................................... 32
13. GUARANTEE ................................................................................................................................................................. 32
1
1. PARTS & FUNCTIONS
A. INDOOR IP CAMERA
1. Power jack
2. Antenna connection
3. Micro SD card slot (Only for HD IP cameras)
4. Terminal connection for alarm
5. Network connection
6. External speaker connection
7. IP Camera
8. Antenna
9. Network cable
10. Power adapter
11. Quick reference guide
B. OUTDOOR IP CAMERA
1
2
3
4
5
6
8
9
10
11
1
3
4
5
6
8
2
7
2
1. Outdoor IP camera
8. Reset button
2. Antenna connection
9. Antenna
3. Network connection
10. Mounting bracket + screws
4. Power connection
11. Network cable
5. Audio out connection
12. Power adapter
6. Audio in connection
13. Quick Reference Guide
7. Terminal connection for alarm
Connections 1 & 2 = OUTPUT / 3 & 4 =
2. GETTING STARTED
2.1. Connecting the device
A. INDOOR IP CAMERA
• Take the mrSafe indoor IP camera out of the box. Attach the Wifi antenna (8).
• Plug the power cable into the power jack (10).
• Plug the network cable (9) into the cable jack and connect the other end of the cable into your router. The
network light will turn on.
• NOTE: If there is no light, please unplug the power and network cable, and check if your router is OK.
Reconnect both cables.
B. OUTDOOR IP CAMERA
• The mrSafe Outdoor IP camera has many connections. When the mrSafe camera can be installed within the
range of your Internet modem, you only need to provide a power supply. We recommend to first configure
the camera close to your computer, and do a test close to the location where it was installed. If the Wifi will
continue stable for one day, the Wifi range seems to be sufficient.
13
10
12
9
11
3
Example of an installation:
• Take the mrSafe outdoor IP camera out of the box. Attach the Wifi antenna (9) and the bracket (10).
• We used a cable box which is available for a few euros at the hardware store.
• The grommets or glands are placed around the cables. You may need to cut the grommet around the camera
cable. If so, it needs to be sealed again later. There are 2 connections open at the bottom of the cable box.
• The cables are introduced into the box and positioned so there isn’t any tension on the connection or the
cable. If you need to cut the box to enter the camera cable, this must be subsequently sealed.
• The power cable of the adapter will be temporarily removed from the terminal box.
• The camera can be fixed to the desired location.
4
• A hole of about 10 mm will be drilled through the wall. The round plug of the power cable will be taken from
the inside to the outside. The cable box is placed close to the power cable. The round plug will be attached to
the camera cable inside the cable box.
• The hole in the wall, the grommets or cable glands and possible cuts in the cable box should be sealed so that
everything is water resistant.
• If you want, you can fix the cable as well. The adapter will now be plugged into a wall socket and the installation
will work.
5
2.2. Software installation
Download the software from www.mrsafe.eu and begin the software installation.
Click “Next” to start the installation.
The system will automatically make a new folder (as shown above), where the software will be installed. Click “Next”
to continue.
NOTE: If you want to save the software on another location please click “Browse” and choose the folder where you
want to install the software. Click “Next” to continue.
6
Select the “Create a desktop icon” button to create a shortcut on your desktop. Click “Next” to continue.
Click “Install” to complete the installation.
The progress of the installation will be shown. This can take a few minutes. When the installation is finished the
software will automatically open on your screen and there will be a shortcut on your desktop (if chosen during
installation).
3. TERMINOLOGY
LAN: Local Area Network: Your home network, which includes your internet modem and all the equipment in the
house that is connected to the network via cable or Wifi.
WAN: Wide Area Network: The internet, if you have an Internet connection at home or anywhere else.
Resolution: The quality and sharpness of the images. The resolution is expressed in pixels horizontal x vertical. The
higher the resolution the better the image quality of the IP camera.
Stream (Bitrate): The number of bits (transmission of information) that can be sent or received per unit of time via a
network connection. A bit is the smallest amount of information. The higher the bitrate, the more information per unit
of time will be send or received.
Framerate: The number of frames per second being imaged.
7
4. WIFI SETTINGS
Click the “mrSafe” shortcut on your desktop to start the program. A quick start menu will automatically appear. The
quick start menu shows 3 steps that you can browse through with the “Next” button. Click “Close” to end the quick
start.
Make sure that the IP camera is connected to your LAN with the network cable. The IP camera will now automatically
be found in your local LAN area. Right click on the IP camera in the LAN list and choose “Setup Wifi”.
8
Select “Start Wifi setting” and press “Scan”. The system is now going to search for local Wifi connections. When the
scan is finished please select your local Wifi in the “Network name (SSID)” box. Type your network password and click
“OK”. After confirming, the IP camera will automatically restart. This can take a few minutes. The camera is now
connected to your Wifi. That means that you can unplug the network cable after the Wifi connection is tested and
move the camera to another location within the Wifi range.
After you have set the Wifi (as described below), you should first check if the camera is functioning properly when it
is placed close to the modem. If that is the case, you must place the camera at the desired location and take a few
days to check if on that location the Wifi connection remains stable, and if the Wifi signal is always strong enough. If
this is the case, you can mount the camera permanently. If the connection is not stable, you should look for a location
closer to the modem, connect to a network or install a Wifi repeater between the camera and the Internet modem.
5. LAN CAMERA
All the cameras that are online in your local network (LAN) will be displayed in the LAN list. The color of the camera
icon next to the name of the camera (CAM ID) will change depending on the status of the camera:
• Gray: Camera not available (offline)
• Blue: Camera available (online)
• Red: Camera is activated and viewed
5.1. LAN Camera browsing
Go to the LAN list and double click on the camera you want to see. The program is now going to make contact with
your IP camera. This can take a few seconds.
9
When the image appears, the camera is ready to operate.
If the image is not completely clear or sharp, you can turn the lens focusing ring till the image appears sharp.
If you want to control the camera and change the viewing angle you have to double click on the image. The image will
reappear with a white edge. Now you can control the camera with the control panel (for further information see
chapter “7.2. Control Panel”).
5.2. LAN Camera settings
You can change the settings of each camera by right clicking on the camera you want to adjust.
5.2.1. Setting options
5.2.1.1. Change the device alias
You can change the camera ID into another name. Type a new name in the box and press “OK”. The camera will now
have another name instead of its ID.
10
5.2.1.2. Set the IP address
You can change the IP address of your camera individually.
• Choose for DHCP if you want to use the automatic assigned IP address.
• If you want to use the same IP address every time, select “Fixed IP”. Put in the IP address manually by clicking
in the “IP address” box.
Press “OK” to save changes. The device status will show “Login successful” when the camera is logged into the mrSafe
server.
5.2.1.3. Set recording schedule
You can set up an automatic recording schedule for your camera. Just click on the specific day you want to record the
images and press “Add”.
11
Choose the start time when the camera must start recording and choose the end time when the camera must stop
recording. Press “Add” to save the settings, the previous menu will reappear. Press “Apply” to confirm the video
schedule.
NOTE:
1. Your computer must be turned ON, the PC software must be turned ON and the camera must be active in the
PC software while recording images with the video schedule. The images will be saved ONLY on your computer
and will ONLY be viewable on your computer.
2. Synchronization time zone: to get an automatic synchronization of the time zone, right-click in the white part
of the screen and choose “Refresh”.
5.2.1.4. Restore to factory default settings
To delete all previous settings and passwords of the camera select “Restore to factory default settings”.
A pop-up window will appear to ask if you are sure to restore the default settings. Press “Yes” to delete all settings.
5.2.1.5. Device restart
You can restart the IP camera by pressing on “Device restart”. The camera will now restart. This can take a few minutes.
5.2.1.6. E-mail alerts
The IP camera can detect motion. This function does not work by using an infrared receiver, but by digitally “looking”
at the image through the camera. When there are too much changes in the image, the motion alarm will be activated.
12
… 13 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mr Safe IP camera - PC software Windows bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mr Safe IP camera - PC software Windows in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 3,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info