R331 Rechargeable Remote Control
13. Multiple Device Power Control Setup Options
After pressing the STB key, pressing the Power key turns the Set-top on or off, AND turns on or
off the TV if it has been setup. If you want the Power key to turn on other devices at the same
time you can enable these as follows:
1. Press and hold the STB key and while holding it pressed, press the OK key for 1
second. Then release both keys. You are now in setup mode.
2. Press and release the mode key (TV, DVD or AUX) you want to enable.
3. Press and release the 1 key. The selected mode is now enabled. If no mode key is
pressed instep 2 ALL modes (TV, DVD and AUX) will be enabled.
To remove a mode from the Power key:
1. Press and hold the STB key and while holding it pressed, press the OK key for 1
second. Then release both keys. You are now in setup mode.
2. Press and release the mode key (TV, DVD or AUX) you want to disable.
3. Press and release the 0 key. The selected mode is now disabled. If no mode key is
pressed in step 2, ALL modes (TV, DVD and AUX) will be disabled.
Note you can turn individual devices on/off by pressing the desired Mode key followed by
the Power key. It is important to point your Motorola remote directly towards the devices
for this feature to operate correctly.
14. Backlight Cancellation Feature
Your Motorola Easy Find Remote Control has the ability to toggle between turning the backlights
on or off. If you wish to use this feature, follow these instructions.
1. Press and hold the TV key and while holding it pressed, press the OK key for one
second and release both keys at the same time.
2. All the mode keys flash and the TV mode key light stays on.
3. Press the GUIDE key, all backlights will no longer turn on. To reverse this process so
that the backlights turn on when the remote control is being used, simply follow the same
steps of the above section one more time
15. Resetting the Remote Control to the Factory Default Settings
1. Press and hold the TV key and while holding it pressed, press the OK key for one
second and release both keys at the same time.
2. All the mode keys will flash, the TV mode key light will stay on.
3. Press and hold the DELETE key for 3 seconds until the TV mode key blinks and stays
off. The remote control is now reset to factory default settings. If you want to use the
remote control for your TV and other devices, you will need to setup the TV, DVD and
AUX mode keys.
4. If no key is pressed within 30 seconds, the remote control times out. The selected mode
key light flashes for 3 seconds and turns off. The remote control returns to normal
operation and you will need to start over.
