seller of the Product; (c) if a war
completed warranty card showing the serial number of the P
a written description of the problem; and, most importantly; (e) your
address and telephone number
Exclusions
Normal W Periodic maintenance, repair and replacement of
parts due to normal wear and tear are excluded from coverage.
Batter Only bat
of their rated capacity and batteries that leak are covered by this limited
warranty
Abuse & Misuse. Defects or damage that result from: (a) improper
operation, storage, misuse or abuse, accident or neglect, suc
damage (cracks, scratc
from misuse; (b) contact with liquid, water
heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use
of the Products or
the Product or
acts which are not the fault of Motorola or SUNCORP are excluded from
coverage.
Use of Non-Motorola br Defects or
damage that result from the use of Non-Motorola branded or certied
Products or
coverage.
Unauthoriz Defects or damages resulting
from service, testing, adjustment, installation, maintenance, alteration, or
modication in any way by someone other than Motorola, SUNCORP or
its authorized service centers, are excluded from coverage.
Altered Pr Products or
tags that have been removed, altered or obliterated; (b) broken seals or
that show evidence of tampering; (c) mismatc
or (d) nonconforming or non-Motorola branded housings, or parts, are
excluded from coverage.
Communication Services. Defects, damages, or the failure of Products
or
subscribe to or use with the Products or
coverage.
How to Obtain
T
Y
your expense and risk, to a SUNCORP
T
original proof of purc
Products or
may use functionally equivalent reconditioned / refurbished / pre-owned
or new Products,
What Other Limitations
ANY IMPLIED
IMPLIED
A P
THIS LIMITED
PROVIDED UNDER
EXCLUSIVE REMED
OF ALL O
SHALL MOT
OR
THE PURCHASE PRICE OF
INDIRECT
ANY KIND, OR L
LOSS OF INFORMA
OF OR IN CONNECTION
PRODUCTS OR A
MA
Some jurisdictions do not allow the limitation or exclusion of incidental
or consequential damages, or limitation on the length of an implied
warranty
This warranty gives you specic legal rights, and you may also have other
rights that vary from one jurisdiction to another
Products Cov Length of Cover
Consumer Products One (1) year from the date of the
products original purc
rst consumer purchaser of the
product.
Consumer Accessor
power supply(s) and line cor
Ninety (90) days from the date of
the accessories original purc
by the rst consumer purchaser of
the product.
Consumer Products and
Accessor
Replaced
The balance of the original
war
from the date returned to the
consumer
generate bres, or place it in locations preventing the free ow of air
over its surfaces.
• Do not submerge any part of your product in w
in damp or humid conditions, suc
• Do not expose your product to re, explosives or other hazardous
conditions.
• There is a slight c
electrical storm.
telephone line cord during an electrical storm.
Product disposal instr
Product disposal instr
When you have no further use for it, please remove an
dispose of them and the product according to your local authority’
recycling processes. For more information, please contact your local
authority or the retailer where the product was purc
Product disposal instr
Business users should contact their suppliers and chec
conditions of the purc
mixed with other commercial waste for disposal.
Consumer Products and
Thank you for purc
under license by Suncorp
Resources Building, 26 Harbour Road,
(“SUNCORP”)
What Does this
Subject to the exclusions contained below, SUNCORP war
this Motorola branded product (“Product”) or certied accessory
(“
free from defects in materials and workmanship under normal consumer
usage for the period outlined below.
exclusive warranty and is not transferable.
Who is cover
This warranty extends only to the rst consumer purc
transferable.
What will SUNCORP do?
SUNCORP or its authorized distributor at its option and within a
commercially reasonable time, will at no c
damage and will often require extensive work to restore the product
to normal operation.
• Clean this product with a soft, damp cloth. Do not use c
cleaning agents to clean this phone.
• Use only the power supply that came with this unit. Using other
power supplies may damage the unit.
• Because this phone operates on electricity
one phone in your home that could operate without electricity in the
case the power in your home goes out.
• T
the phone on or near a
Batt
• Do not burn, disassemble, mutilate, or puncture the battery
battery contains toxic materials that could be released, resulting in
injury
IMPORT
There is a risk of explosion if you replace the battery with an incorrect
battery type. Use only the bat
authorized replacement recommended by the manufacturer
• Keep batteries out of the reac
• Remove bat
• Do not dispose of batteries in re, whic
• The rechargeable bat
of properly and may need to be recycled. Refer to your battery’
label for battery type. Contact your local recycling center for proper
disposal methods.
SA
Cleaning
• Clean the handset and base (or c
or an anti-static wipe.
• Never use household polish as this will damage the product. Never
use a dry cloth as this may cause static shoc
Envir
• Do not expose to direct sunlight.
• The handset may become warm when the batteries are being
charged or during prolonged periods of use.
we recommend that to avoid damage, do not place the product on
antique / veneered wood.
• Do not place your product on carpets or other surfaces whic
• Do not use this product near water (for example, near a bath tub,
kitc
• Do not allow anything to rest on the power cord. Place the power
cord so that it will not be walked on.
• Never insert objects of any kind into the product vents as that may
result in re or electric shoc
• Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
• Do not disassemble this product. If service or repair work is required,
contact the customer service helpline found in this user’
• Do not overload wall outlets and extension cords.
• Av
protect the equipment.
• Do not use this phone to report a gas leak, especially if you are in the
vicinity of the gas line.
IMPORT
T
Unplug this cordless phone immediat
outlet if:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled on the product.
• The product has been exposed to rain or water
handset or base until after you have unplugged the power and phone
from the wall.
• The product has been dropped or the cabinet has been damaged.
• The product exhibits a distinct c
Installation Guidelines
• Read and understand all instructions and save them for future
reference.
• Follow all warnings and instructions marked on the product.
• Do not install this product near a bath tub, sink, or shower
• Operate this phone using only the power source that is indicated
on the marking label. If you are unsure of the power supply to your
home, consult with your dealer or local power company
• Do not place this product on an unstable cart, stand, or table.
product may fall, causing serious damage to the product.
• Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in
• The record cannot be found in your phonebook. Chec
the correct name / number stored in your phonebook, with the full
area code.
I hav
• Restore your C1L to its default settings, see
Cannot regist
• Y
must de-register a handset in order to register a new one.
• Check that you have entered the cor
• Check that you are at least one metre aw
equipment to avoid interference when registering.
Handset does not r
• The handset ringer volume may be set to Off
Noise interf
equipment nearby
• Place your C1L at least one metre away from electrical appliances or
any metal obstructions to avoid an
Answer
• Is the recording memory full? Play and delete messages.
• Is the OGM set to
Record.
1
IMPORT
This equipment is not designed to make emergency telephone calls when
the power fails. Alternative ar
emergency services.
This product is intended for connection to analogue public switc
telephone networks and private switchboards in Europe.
Important saf
Follow these safety precautions when using your phone to reduce the risk
of re, electric shoc
• Keep all slits and openings of the phone unbloc
phone on a heating register or over a radiator
ventilation is provided at the installation site.
• Do not use while wet or while standing in water
2. Scroll
to
DEL HANDSET
and press .
3. Enter the 4 digit PIN code (default = 00
.
4. Enter the handset number that you want to de-register
conrmation beep and the display will return to the previous menu.
1
No dial tone
• Use only the telephone line cord supplied.
• Check that the telephone line cord is connected properly
• Check that the mains power is connected properly and switc
No display
• Check that the bat
only approved rec
• Check that the handset is switc
.
• Reset the base by removing the bat
mains power
Allow up to one minute for the handset and base to sync
icon ashes
• Handset is out of range. Move closer to the base.
• Make sure that the handset is registered to the base.
• Check that the mains power is connected properly and switc
Keypad does not seem t
• Check that the keypad loc
icon is not scrolling dur
• Adjust the handset slightly on the base.
• Clean the charging contacts with a cloth moistened with alcohol.
• Check that the mains power is connected properly and switc
• The battery is full.
icon will
appear steady on the display
No Caller ID
• Check your subscription with your network operator
• The caller may have withheld their number
9.2 Register a dif
IMPORT
DECT GAP Prole only guarantees that basic calling functions will work
correctly between dif
possibility that certain features suc
On the base:
1. Press and hold
for 3 seconds until you hear two beeps.
will remain in registration mode for 90 seconds.
On the handset:
Follow the registration instructions given in your handset’
9.3 Select a base
If your C1L handset is registered to more than one base (e.g. one at work
and one at home), you can select whic
Eac
1. Press
, scroll to
REGISTER
and press .
SELECT BASE
.
2. Press
.
will be displayed, e.g.
BASE 1 2 3 4
.
ashes.
3. Enter the base number that you want to use.
or to scroll to
AUTO
.
4. Press
to conrm.
display will return to standby
NOTE
If you select
AUTO
, your handset will automatically searc
to the base with the strongest signal.
9.4 De-regist
Use one handset to de-register another
that you are using.
1. Press
, scroll to
SETUP
and press .
If you have purchased an additional handset separately
it to your C1L base before it can be used.
9.1 Register
NOTE
Handset batteries must be fully c
your handset close to the base during the registration process. Handsets
that were supplied with your C1L base are already pre-registered.
On the base:
1. Press and hold
for 3 seconds until you hear two beeps.
will remain in registration mode for 90 seconds.
On the handset:
1. Press
, scroll to
REGISTER
and press .
2. Scroll
to
REG BASE
and press .
3. Enter the base number (1 - 4).
The base numbers that are already in use ash.
4. The display shows
SEARCHING...X
, where
X
indicates the base
identication number
5. The display will ask for the PIN to be entered. Enter the 4 digit PIN
code (default = 00
.
registration is successful.
available handset number
calls.
NOTE
If registration is not successful the rst time, please repeat the process
again in case the base registration period ran out of time. If the base is not
found after a few seconds, the handset returns to standby
again.
If there are already 5 handsets registered to the base, the registration
will fail.
new one.
8.2.2 Dial a number in the Calls list
1. Press
to open the Calls list.
2. Scroll
or to the entry you want.
3. Press
to dial the displayed entry
8.2.3 Copy a Calls list number to the phonebook
1. Press
to open the Calls list.
2. Scroll
or to the entry you want.
3. Press
repeatedly until the display shows
ADD ?
.
4. Press
again.
NAME ?
.
5. Enter the name and press
.
6. Edit the number if necessary
.
7. Press
or to select the ringer melody you want and press .
The number is stored.
8.2.4 Delete an entry
1. Press
to open the Calls list.
2. Scroll
or to the entry you want and press . The display
shows
DELETE ?
.
3. Press
to conrm or to cancel.
8.2.5 Delete the entire Calls list
1. Press
to open the Calls list.
2. Press and hold
.
DELETE ALL ?
.
3. Press
to conrm or to cancel.
9. Using additional handsets
Y
phone system without having to install extension soc
phone.
Eac
select the base you prefer to use. If you have purc
pac
caller’
answering the call.
the phone numbers and names.
If your caller’
number matc
instead.
8.2 Calls
The Calls list stores details of your last 40 received calls, including the
phone number and date and time of the call.
The Calls list also alerts you when you have unanswered calls.
The caller’
answered the call.
When the list is full, and a new call is received, the oldest entry will be
deleted automatically
When a new call is received in the Calls list,
icon will ash on the
display in standby mode to alert you.
icon disappears but icon will remain.
8.2.1 View the Calls list
1. Press
to open the Calls list. If there are no calls in the list, the
display shows
EMPTY
.
2. Press
or to scroll through the list.
• If the call was answered, icon is displayed as you scroll to
the entry icon is displayed as you
scroll to the entry
will beep.
• f the caller’
phonebook, the display will alternate between the name and the
number to see the caller’
• If the telephone number is longer than 12 digits, icon is
displayed. Press to see the remaining digits.
• Press ag
• Press ag
phonebook.
7 Set the time
1. Press , scroll to
DA
and press .
2. Scroll
to
CLOCK SET
and press .
3. Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press
to conrm.
7
Eac
1. Press
, scroll to
DA
and press .
2. Scroll
to
ALARM SET
and press .
3. Press
or to select
ON
or
OFF
and press to conrm.
4. If you select
ON
, enter the time in 24 hour format (e.g. 07
7:30am) and press to conrm.
7 S
When the alarm sounds, press any button to switc
NOTE
If you are using the handset to make a call when the alarm ring is due, you
will hear a beep in the earpiece.
8. Caller ID and the Calls list
IMPORT
T
provider
T
the full telephone number
If the call is a withheld call,
WITHHELD
will be displayed.
If the number is unavailable,
UNAV
will be displayed.
If the call is from an international number
INT’L
will be displayed.
If the call is from the operator
OPERA
will be displayed.
If the call is from a payphone,
P
will be displayed.
If the call is from a ringback request,
RINGBACK
will be displayed.
8.1 Caller
If you have subscribed to a Caller ID Service, you will be able to see your
and energy consumption when switc
T
1. Press
, scroll to
SETUP
and press .
2. Scroll
to
ECO MODE
and press .
3. Press
or to select
ON
or
OFF
and press to conrm.
NOTE
When ECO mode is set to ON, the handset range will be reduced.
On the handset display when ECO mode is switch of
disappears.
6.7 Default
Low battery beeps ON Calls list Empty
Out of range warning beeps ON Redial list Empty
Key beep ON PIN code 0000
Auto answer ON Dial mode T
Internal melody 1 Recall mode TIMED
BR, 1 (100
ms)
Internal volume 3 Eco mode OFF
External melody 3 Keypad loc OFF
External volume 3 Answering machine ON
Ear volume 2 Answer delay 6 rings
Phonebook Empty
7
If you have subscribed to Caller ID Service, the date and time will be set
on all your handsets whenever a call is received.
the date and time on the individual handsets.
7 Set the dat
1. Press , scroll to
DA
and press .
DA
.
2. Press
to select.
3. Enter the date (e.g. 12--08 for 12th of
to
conrm.
conrm.
6.3 Recall
Depending on your country and network operator
time set as 1
setting unless advised to do so.
1. Press
, scroll to
SETUP
and press .
2. Scroll
to
RECALL
and press .
3. Press
or to select
TIMED BR,1
(short ash time) or
TIMED BR,2
(long
ash time) and press to conrm.
6.4 Restor
Y
All the handsets that are registered to the base will be retained.
IMPORT
Resetting your phone to its default set
Phonebook and Calls list.
1. Press
, scroll to
SETUP
and press .
2. Scroll
to
DEFAUL
and press .
3. Enter the 4 digit PIN code (default = 00
. The
display shows
CONFIRM ?
.
4. Press
to conrm or to return to the previous menu.
C1L will restart automatically
6.5 Emerg
If you have lost your PIN code, you can still restore your C1L to its
default settings.
1. Remove the bat
2. Press and hold
while replacing the batteries.
shows
DEFAUL
3. Press to conrm.
6.6 Eco
Y
5.9 Keypad loc
Y
1. Press
, scroll to
HANDSET
and press .
2. Scroll
to
KEYLOCK ?
and press to conrm.
icon is displayed.
NOTE
T
within 5 seconds.
6. Base set
6.1 Change base PIN code
Some functions are protected by a 4 digit PIN code whic
if you want to c
this to your own preferred number
When you enter a PIN, the digits are shown as ****.
1. Press
, scroll to
SETUP
and press .
2. Scroll
to
PIN CODE
and press .
3. Enter the 4 digit PIN code (default = 00
.
4. Enter the new PIN and press
to conrm.
5. The display shows
RETYPE
. Re-enter the new PIN and press
to conrm.
IMPORT
If you c
6.2 Dial
Y
connected to an older type of switc
pulse dialling.
1. Press
, scroll to
SETUP
and press .
2. Scroll
to
DIAL MODE
and press .
3. Press
or to select
TONE DIAL
or
PULSE DIAL
and press to
5.5 Language
1. Press , scroll to
HANDSET
and press .
2. Scroll
to
LANGUAGE
and press .
3. Press
or to select your preferred language and press
to conrm.
5.6 Key
When you press a button on the handset keypad, you will hear a beep.
Y
1. Press
, scroll to
HANDSET
and press .
BEEP
.
2. Press
to select.
KEYTONE
.
3. Press
to select.
4. Press
or to select
ON
or
OFF
and press to conrm.
5.7 Batt
When the battery is almost fully disc
every minute during a call.
1. Press
, scroll to
HANDSET
and press .
BEEP
.
2. Press
to select.
3. Scroll
to
LOW BA
and press .
4. Press
or to select
ON
or
OFF
and press to conrm.
5.8 Out of range w
If the handset goes out of range, you will hear warning beeps during a
call.
1. Press
, scroll to
HANDSET
and press .
BEEP
.
2. Press
to select.
3. Scroll
to
OUT RANGE
and press .
4. Press
or to select
ON
or
OFF
and press to conrm.
