18
5. Peel the red backing label from the Surf Mount
Disc. Press and hold, and again set something
heavy on top. (24 hours if you can manage)
6. Double check your mounts and tighten the
case adjustment knob using the hex wrench
provided with OutRide if needed.
7. Make sure to connect the leash to OutRide
and use the hook to connect it to the Surf
Mount when riding.
*Note: After each salt-water use, OutRide must be
rinsed in fresh water to prevent corrosion to hinges
and build up on the seal. For best results, remove
the case seal, rinse the case and seal separately
and allow both to dry before reinstalling.
FLAT & CURVED MOUNT INSTRUCTIONS
Mount where you want...
1. Stating the obvious here. Flat Mounts are good
for sticking to at surfaces. Curved Mounts are
better for curved surfaces (like helmets).
2. Make sure OutRide has the Thumb-latch Quick
Release connected.
3. Slide the Quick Release onto the Mount of
your choice and keep in mind you can flip it
180 on the Mount when you want to.