15
2. Loosen the adjustment knobs at the bottom
of the handlebar clamp until you can swing
one side free through the open slot in the
lower clamp.
3. Position the clamp on your handlebar where
there is sucient room for the clamp and your
ngers for tightening the knobs.
4. Tighten the knobs until snug, then adjust the
angle of the mounted DogBone extension using
the adjustment knob at that joint.
5. When everything is where you want it, go back
and tighten all the knobs some more.
6. Make sure to connect the leash to OutRide
and use the hook around the bar and back to
the leash when riding.
Tips!
• Try pointing the handlebar clamp forward
on the left side of your bike stem with the 1”
DogBone aiming down. This hangs OutRide
upside down with the lens close to the
centerline of your bike and keeps OutRide out
of your immediate vision.
• Try dierent positions to see what works
best for avoiding excessive vibration during
your riding and any suspension you may
be running.
