Error Message Suggested Actions
E1 Front Cliff sensor
The robot might be trapped in a specific area where there are stairs or floor
edge.
E2 Charging Error
Please refer to the correct installation process of the charging dock and try
it again.
E3 Front Bumper Error
The robots front bumper is stuck. Check the front bumper.
E4 Dust bin mounting Error
Dust bin mounting Error.
E5 Left Wheel Overloaded
Check the Left wheel, and remove any objects stuck.
E6 Right Wheel Overloaded
Check the right wheel, and remove any objects stuck.
E7 Side Brushes Overloaded
Check both side brushes to remove any jammed objects or debris.
E8 Main Brush Overloaded
E9 Vacuum Motor Overloaded
Stop using the robot for at least 60 min and then restart it again. If this
message still shows up, please contact your local warranty center provider.
Power supply
Input: 100-240V AC 50-60Hz, 1A
Output: 20V DC, 1A
Rechargeable battery
Charging time
Operating Time
Dustbin capacity
Dimension (W x D x H)
Li-ion 14.8V, 2600mAh
2.5 hrs
120 min.
0.5 l
330x330x79 mm
Fehlermeldung
Product specifications
Net weight
360 mm
2,5kg
Cleaning area diameter
Check the rolling brush to remove any jammed objects or debris.