475266
31
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
Appendices 31
For assistance call 1(800) 332-2119
Reset Name When to Use How to Use Resulting Action
System Reset If the TV does not turn
on or off, does not
respond to the remote
control or control-
panel buttons, or has
audio but no video.
Press and hold the
POWER
button on
the control panel for ten seconds.
The TV will turn off and power
on. Any changes you made
most recently, before using
SYSTEM RESET
, may be lost.
Reset All To reset all consumer-
accessible settings
and all memories to
the original factory
defaults.
Press
MENU
and go to Setup >
Reset All.
CAUTION: All owner-performed
setups and adjustments will be
erased.
The TV will return to the default
condition and will start the
guided setup. All memory and
settings outlined in this Owner’s
Guide will need to be set again.
Appendix B: Troubleshooting, continued
General TV Operation
Symptom Remarks
1. A fan is running even while the TV is
powered off.
The room is too warm. When the TV is off, internal components con-
tinue to draw power and must be cooled by the fan.
2.
The TV remote control does not work. Check that the batteries are fresh and installed correctly.
Be no more than 20 feet from the TV when using the remote control.
Reset the remote control. See “Care of the Remote Control,” page 29 .
3.
When I try to use the remote control, the
POWER key blinks five times.
Replace the batteries.
4.
TV does not respond to the remote
control or to control-panel buttons and
TV will not power on or off.
Unplug the AC power cord for 10 seconds.
Press and hold the
POWER
button on the control panel to perform
system reset.
5.
When a device is selected from the
inputs menu, the screen is blue or black
or the screen saver appeared (no signal
source).
Make sure the selected device is turned on.
Begin play of the device.
6.
You cannot access a channel.
Use number keys instead of
CHANNEL
/ .
Be sure the channel you want to view is in memory.
Check that the TV is switched to the correct device or antenna for
that channel by pressing the
INPUT
key.
Make sure the channel is not locked in the Channel Locks menu.
If you cannot tune to a virtual digital channel even though the TV
has already memorized digital channels, tune to the physical (RF)
channel number used by the broadcaster. The virtual channel will
then be automatically added to memory. See Adding a Channel,
page 24 for more on RF channels.
You may be trying to tune to an analog channel that is no longer
broadcasting.
7.
Rating restrictions are not working.
Open the Locks menu and:
Verify that the ratings locks are active.
Rating restrictions apply only to content on the
antenna
input.
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mitsubishi WD-73C10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mitsubishi WD-73C10 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info