475266
30
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
30 Appendices
For assistance call 1(800) 332-2119
Reset Name When to Use How to Use Resulting Action
Format If the picture shape
seems incorrect, use
the
FORMAT
key to
change the picture
shape.
Press
FORMAT
to cycle through the
available picture shapes for the
signal.
The last-used format for a signal
type will be recalled on the input.
Note: Also check the aspect ratio
feature on your cable box, satellite
receiver, or other device, as this may
be altering the picture.
Picture and
Sound Resets
(for the single
current input)
When audio and/
or video settings for
a single input seem
incorrect, use the reset
option to return the
input to the original
factory settings.
While viewing the input to reset, 1.
press
MENU
and go to Picture >
Reset or Sound > Reset.
Press 2.
ENTER
to reset.
All picture or sound settings for
the individual input are reset.
Channel Scan To erase and re-mem-
orize channels on the
antenna input. Use
after moving the TV to
a new area or reposi-
tioning the antenna.
Press 1.
MENU
and go to Channels
> Antenna Source.
Highlight the reception mode, 2.
either Cable or Air, and press
ENTER
.
Go to 3. Channels > Scan Channels
and start the channel scan. Be
sure Additive Scan is set to OFF.
All previously memorized chan-
nels for the antenna input are
erased and a new set of memo-
rized channels is created.
Locks Menu
PIN
To change your Locks
menu PIN
When prompted for the PIN, press
the number
9
and
LAST
keys on the
TV remote control at the same time.
To use number keys only, press
6 4 8 7
.
Allows establishment of a new
PIN.
TV Locks To temporarily disable
channel or ratings
locks.
Allows you to view a locked
channel or program. Turn the TV
off and then on to restore locks.
TV Re set Comparison Guide
You can resolve many common TV problems using the
reset functions described in the following table.
IMPORTANT
Before you change sound or picture settings: If
picture or sound settings seem wrong for a broadcast
channel (a channel from the
ANT
input, a cable box,
or satellite receiver), first check other channels from
the same input before changing settings. If most other
channels from the same input seem correct, there is
likely a problem with the broadcast rather than with the
TV. Use care in this case, as changes you make to fix
problems on individual channels also affect all other
channels on the same input.
Appendix B: Troubleshooting
Service and Customer Support
Service
If you are unable to correct a problem with your TV,
consult your Mitsubishi dealer or Mitsubishi Consumer
Relations at (800) 332-2119.
DO NOT adjust any controls other than those
described in this Owner’s Guide.
DO NOT remove the protective back cover of your
TV.
Customer Support
To order replacement or additional remote controls
or lamp cart
ridges,
visit our website at www.mitsu-
parts.com or call (800) 553-7278.
• For questions:
Call Consumer Relations at 800-332-2119.
E-mail: MDEAservice@mdea.com
Website: www.mitsubishi-tv.com
Important
All lamps replaced under warranty must be returned to
Mitsubishi where they will be inspected to verify failure
defects.
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mitsubishi WD-73C10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mitsubishi WD-73C10 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info