Handleiding Mitsubishi WD-62628 (pagina 33 van 124) (Engels)

475319

Verklein

Vergroot

Pagina terug

1/124

Pagina verder

Chapter 2. Connecting 33

When Connecting IEEE 1394 Devices

• Donotloopthelastdeviceinthechainbacktothe

TV. When the device chain is looped, the TV may not

be able to work with the other devices.

%JHJUBM

%7%

%JHJUBM

7$3

• Placedevicesthathaveonlyamechanical

(two-position) power switch at the end of the chain

or leave the power switch in the On position. When

turned Off, IEEE 1394 signals may not be able to

pass through the device to other devices.

• Placedeviceswiththeslowestcommunication

speed at the end of the chain. Sometimes the

communication speed will be marked near the IEEE

1394 connector with an “S” number. The higher the

number, the faster the communication speed. This

TV has a communication speed of S400. Devices

with slow communication speed can interfere with

IEEE 1394 signals from faster devices. When using

NetCommand to set up a digital recording between

a faster device and a slower device, make the slower

device the source and make the faster device the

recorder.

• DonotuseanIEEE1394cableover15feetinlength

between each device.

• ThisTVisanIEEE1394adevice.Itcanbeused

with a 1394b system when an IEEE-1394a-to-1394b

convertor is used. 1394b systems are capable of

greater distances and multi-room applications.

Connecting Compatible IEEE 1394 Devices

Compatible IEEE 1394 Devices

Compatible A/V devices include some, but not all, cable

boxes, D-VHS VCRs, A/V discs, and future products. It

is also possible to connect devices to the TV that have

IEEE 1394 connectors but are not compatible with the

TV or with the NetCommand

control system. Areas of

compatibility to consider are:

1. Digital Video Signals

The TV is able to decode MPEG2 and DV video as

provided by some camcorders. If the TV is unable to

decode the digital signal supplied by your camcorder, try

S-video with analog audio connections instead. Other

types of digital video, such as PC video provided by

some computers, must be decoded by the source device

and sent to the TV as analog video, S-video, or HDMI

video.

2. Digital Audio Signals

When received with video signals, the TV is able to

decode Dolby Digital signals and MPEG audio signals.

Other types of digital audio as provided by some digital

recording devices, such as MP3 audio and DTS audio,

cannot be decoded by the TV when received over IEEE

1394

The TV may not be able to pass incompatible digital audio

signals on the coaxial digital audio output, however, these

signals may pass on the IEEE 1394 cable to other devices.

3. Digital Control Signal

The TV can serve as the control center for IEEE 1394

audio/video devices, such as VCRs, A/V Discs, tuners,

cable boxes and amplifiers that are compatible with the

following IEEE 1394 control standards.

• EIA-775 is designed for tuning devices such as cable

boxes, allowing the device to send simple graphics.

This standard does not, however, allow the TV to

control the cable box by IEEE 1394.

• AV/C (Audio Video Control) is designed to provide

basic controls such as play, stop, channel selection,

and volume, as appropriate for the device.

The IEEE 1394 interface may not provide reliable control

signals for some DV camcorders, especially older models.

If your camcorder operates incorrectly or not at all, use

the camcorder’s control buttons instead of the IEEE 1394

connection.

Some devices may be a combination of two or more

types of devices. For example, there may be a recording

device that is also a tuning device. Each portion of the

device is called a sub-unit. When you select a device on

the Device Selection menu that has sub-units, a pop-up

menu will appear so you can select which sub-unit

section you wish to use.

IMPORTANT

DV Camcorder Playback

A. When viewing DV camcorders, it is normal

for temporary audio and video distortion to

occur under conditions such as:

• Playbackstartandstop

• Playbackpause

• Forwardorreversepicturesearch

B. Some DV Camcorder models are not

compatible with this TV’s IEEE 1394 system.

Because of this, the “New 1394 Device”

screen will not appear when the camcorder

is connected. For playback of incompatible

DV camcorders, try S-video with analog

audio connections instead.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Mitsubishi WD-62628 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info