19
Important:
Due to possible incompatibility of USB hubs or USB interfa-
ce cards, faults may arise during the connection or downlo-
ad of data to the PC. We therefore cannot guarantee
satisfactory compatibility. Liability for damage or loss of da-
ta is excluded.
Note:
Due to packaging reasons the DD100 is delivered with a
Mini CD-ROM. In computers with older CD-ROM drives
difficulties may arise when reading this Mini CD-ROM. If this
is the case please contact our Customer Service.We will then
send you a standard size CD-ROM
Image processing/image viewing programs
You can use any commercially available image processing/
image viewing program to process/view your pictures.
Connecting the DD100 to your PC
When connecting the camera to the computer for the first
time please make sure that the CD-ROM for the DD100 is in
the CD-ROM drive. To connect the camera to your computer
please observe the instructions given below.
DD100 Driver (for Windows 98 SE)
1. Plug the smaller USB connector into the USB port of your
DD100 (on the left-hand side of the camera)
2. Plug the larger USB connector into the USB port on your
computer.
3. The DD100 is "BUS-powered". This means that the USB
port provides the DD100 with power as soon as it is
connected to the computer and automatically switches it on.
4. The computer/operating system recognizes the DD100 as
a new unknown device. You are then requested to install
the appropriate driver.
5. Follow the instructions on the screen to complete the in-
stallation of the driver.
Note:
If you are working with Windows 98SE always make
sure that the CD-ROM for the DD100 is in the CD-ROM drive
before you connect the DD100 to your computer for the first
time! Under the operating systems Windows ME/2000/XP or
MacOS 9.x the installation of a camera driver is not usually
necessary. In these cases your computer automatically reco-
gnizes the camera as removable data medium. Should your
computer still ask you to install the camera driver, please fol-
low the instructions given on the screen.
