EN 7 millnorway.com
Instructions
Control panel
1. Button to increase the temperature
2. ON / Standby
3. Button to lower the temperature
4. Timer
5. LED display
6. Fan speed (low / high)
ATTENTION! This heater is only meant to be used as a supplementary
heating source, and must not be used without supervision.
Use
1. Insert the plug into a grounded electrical outlet.
NOTE! The fan heater must be placed in an upright position so that the control panel is at the top.
Minimum distance from the bottom of the fan heater to the ground or other objects must be 10 cm.
The minimum distance between the sides of the heater and any walls or other objects must be 50 cm.
2. Press the ON / OFF button on the side of the heater to turn it on. The night light is activated.
3. Press the ON / Standby button on the control panel to start the heater.
4. Press Temp + to increase the temperature.
5. Press Temp– to lower the temperature.
6. To adjust the speed of the fan, press Temp + and Temp– simultaneously. You can then choose between
2 speeds low / high.
7. Press Timer to activate timer function (0-12 hours).
Timer OFF: When the fan heater is on press Timer. The display now changes from temperature to hours.
Keep pressing the Timer button until you have reached the desired number of hours you want the fan
heater to be activated before it switches off automatically. You have the choice between 0 to 12 hours.
Timer ON: When the heater is in standby press Timer. The display now changes from temperature to
hours. Keep pressing the Timer button until you have reached the desired time for when you want the
fan heater to switch on automatically. You have the choice between 0 to 12 hours.
Deactivating the timer: Press the timer button until the number 0 appears on the display. The timer
function is now closed.
8. Press the ON / Standby button when you want to turn off the heater. This will stop the heating function,
but the fan will continue to blow air for about 1 minute for the heater to cool down. The fan will then
switch off automatically. Press the OFF button on the side of the heater and pull the plug out of the
socket.