6.2. Setting the User
This monitor allows you to track readings for two individuals
independently. Scroll to User and press OK to enter the submenu.
Press ▲ or ▼ to make your selection. Select to set the
device to not save readings.
Select to select user 1. Any readings made when user 1 is
selected will be saved separately from other readings.
Select to select user 2. Any readings made when user 2 is
selected will be saved separately from other readings.
After selecting user 1 or user 2 you are prompted to enter the
user name. You can use up to six characters. To keep the default
name «User_1», press O/I. To enter a different name, follow these
instructions:
Press ▲ or ▼ to scroll through the alphanumeric characters A ~ Z
and 0 ~ 9. There is also one underscore and one space character.
Press OK to accept the character and move to the next space.
After you have finished entering the name, press OK to exit the
user setup menu. The user name is displayed on the screen.
6.3. Clearing the Memory
This item enables you to clear readings for user 1 or user 2. You
can erase single readings, or erase all readings at once.
Select user 1 or user 2 as explained under 6.2. Scroll to Clear
Memory and press OK. The user you selected is shown in the
upper left corner.
14
USER
[▼] [▲]
USER_1
JAMES MAM
15:31
[▼] [▲]
EXIT=[O/I]
ALL
SINGLE
[▼] [▲]
CLEAR MEMORY
Apr 17 2003
