517332
77
Verklein
Vergroot
Pagina terug
1/139
Pagina verder
77
ķ
In TTL flash modes, manual flash exposure correction factors of from -3 EV (f–stops)
to +3 EV (f-stops) can be adjusted on the flash unit in one-third increments.
Tip:
Dark subject against light background: positive correction factor. Light subject
against dark background: negative correction factor.
Exposure correction by means of alteration of the lens aperture setting is
impossible, since the camera’s automatic exposure program regards the
altered aperture setting as the normal working aperture setting. When
setting the correction factor, the distance shown in the display can chan-
ge and be adjusted to the correction factor (depending on the camera
model)!
Setting procedure
• Press button ( - ) or ( + ) until „EV“ flashes. Apply the setting wished with the
buttons ( + ) and ( - ):
Set a negative correction factor with the button ( - ) or a positive one with the
button ( + ).The setting takes effect immediately. After about 5 seconds the
display stops flashing and the setting is saved automatically. After saving,
„EV“ appears in the display with the correction value set in place of the aper-
ture factor.
Press the button ( - ) or ( + ) until „EV“ without a correction factor is shown. The
setting takes effect immediately. After about 5 seconds the display stops flashing
and the setting is saved automatically. After saving the aperture factor appears
once again.
Manual flash exposure correction is only possible in TTL flash mode if the
camera supports this function (consult the camera’s operating instruc-
tions)! If the camera does not support this function, the adjusted correc-
tion will have no effect.
For some camera models, the manual flash exposure corrections must be adju-
sted on the camera. If this is the case, no correction value will appear on the
flash unit display.
After the shot, remember to cancel the TTL flash exposure correction in the
camera!
9 Special functions („Select“)
Depending on the camera model or camera group (see Table 1), various special
functions are available. For this purpose, data exchange must first occur bet-
ween the flash unit and camera to access and set the special functions, for
example by tapping the shutter release. Accessing the individual special func-
tions is achieved with the button „Select“, that is to say, the buttons ( - ) or ( + )
must be pressed simultaneously. The accompanying special functions and set-
tings desired are then carried out individually with the button ( - ) or ( + ).
The setting must occur immediately after accessing the special functions
since otherwise the flash unit automatically switches back to normal
flash operation after a few seconds!
9.1 Motor zoom main reflector („Zoom“)
The motor zoom main reflector of the flash unit can illuminate lens angles
from 24 mm (35 mm format): Thanks to the use of the integrated wide-angle
diffuser , the illumination widens to 18 mm.
Auto zoom
When the flash unit is operated with a camera from Groups B, C, D or E and a
lens with CPU, the zoom position of the main reflector adjusts automatically
to the lens focal length. After switching on the flash unit, „Zoom“ appears in the
display and the current zoom position of the main reflector appears.
Automatic adjustment occurs for lens focal lengths from 24 mm. If a focal length
of less than 24 mm is used, „24“ flashes in the display as a warning that the
shot cannot be completely lit.
If so desired, the position of the main reflector can be manually adjusted in
order to achieve particular lighting effects (such as spot effect etc.).
707 47 0081.A2 48AF-1Nikon/Inh. 19.09.2007 12:42 Uhr Seite 77
77

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metz MECABLITZ 48 AF-1 digital Nikon bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metz MECABLITZ 48 AF-1 digital Nikon in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info