517332
75
Verklein
Vergroot
Pagina terug
1/139
Pagina verder
75
ķ
shooting, the flash unit fires a series of barely visible measuring preflashes. The
camera evaluates the reflected preflash light so that the subsequent flash expo-
sure is optimally adapted to the prevailing photographic situation. According to
the evaluation, the following flash exposure is adjusted by the camera to the
shooting situation (for more information see camera’s operating instructions).
Setting procedure
• Press „Mode“ until „ “ flashes in the display. The flash unit sets the i-TTL or
D-TTL flash mode according to the camera model. There is no special distinc-
tion between i-TTL and D-TTL in the display.
The setting takes effect immediately. After about 5 seconds the display stops
flashing and the setting is saved automatically. „ appears in the
display.
i-TTL BL and D-TTL 3D flash mode
These digital TTL flash modes are only supported by cameras of the Groups E or
D if lenses are used that transmit distance data to the camera (for example, „D-
AF Nikkor lens“). When shooting this data is taken into consideration in addi-
tion in adjusting the flash exposure.
Setting procedure
• Press „Mode“ until „ BL“ flashes in the display. The flash unit sets the i-
TTL BL or D-TTL 3D flash mode according to the camera model. There is no
special distinction between i-TTL BL and D-TTL 3D in the display.
The setting takes effect immediately. After about 5 seconds the display stops
flashing and the setting is saved automatically. „ BL“ appears in the
display.
Some cameras do not support the BL or 3D function in combination with
SPOT exposure metering. These flash modes will then either be automati-
cally cancelled and/or cannot be activated in the first place! In these
cases, the normal i-TTL or D-TTL modes will be set.
TTL
TTL
TTL
TTL
3D multi-sensor fill-in flash mode
This analogue TTL flash mode is supported by cameras from Group C (see Table
1). Prior to shooting, the flash unit fires a series of barely visible measuring pre-
flashes. The TTL multi-sensor and the micro-controller of the camera evaluate the
reflected preflash light so that the subsequent TTL flash exposure is optimally
adapted to the prevailing photographic situation („multi-sensor fill-in flash“). If
lenses are used that transmit distance data to the camera (for example, „D-AF
Nikkor lens“), this data is taken into consideration in addition in adjusting the
flash exposure („3D multi-sensor fill-in flash“).
Setting procedure
• Press „Mode“ button until „ BL“ flashes in the display.
The setting takes effect immediately. After about 5 seconds the display stops
flashing and the setting is saved automatically. „ BL“ appears in the
display.
Some cameras do not support the 3D multi-sensor fill-in flash in combi-
nation with SPOT exposure metering! This flash mode (symbol „BL“) will
then either be automatically cancelled or cannot be activated in the first
place! In these cases, the normal TTL flash mode will be set.
Matrix-controlled fill-in flash mode
This analogue TTL flash mode is supported by cameras from Group B (see Table
1). The subject and background lighting is automatically adjusted to each other
without the subject itself being overexposed. The lighting setting for the ambient
light is determined by the camera with matrix measurement.
When used with cameras from Group A (see Table 1), the setting and display of
this fill-in flash mode occurs in the camera itself or this flash mode is automati-
cally activated by the camera itself (see camera’s operating instructions). In this
case there is no setting and display in the flash unit.
TTL
TTL
707 47 0081.A2 48AF-1Nikon/Inh. 19.09.2007 12:42 Uhr Seite 75
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metz MECABLITZ 48 AF-1 digital Nikon bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metz MECABLITZ 48 AF-1 digital Nikon in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info