9
info@metronic.com
Option 2
You are able to receive national channels in analogue and you have no idea
whatyoucanreceiveindigitalquality.
If you are certain that you can receive additional channels, but you do
not know which network is used for these channels, we advise that
you do the following :
Find a UHF antenna with high gain (at least 15 dB) and connect it to
the ANT input of the receiver. Adjust the antenna so it is in the same
position as the previous one and start an automatic channels search
(Go to Menu / Setup / Service Setup / xxxx / Fullscan Replace Existing
Services).
If you find channels that you were unable to receive with your previous
antenna,simplyreplaceitwiththenewone.Otherwise,swiveltheantenna1/8
of a turn and start another automatic search. As long as you do not find any
channels, continue the same process. You should end up receiving at least
a few channels.
• Findoneofthenewchannelsreceived.
• GotoMenu/Setup/Service Setup/xxxx / Manual Scan.
• Atthebottomofthescreen,youcanviewthereceptionlevel and quality.
• Turn the antenna to optimise the quality and level (quality must be
atleast6).
• Screwtheantennatightly.
• PressMenu to go back to the previous menu.
• Start anautomatic search (GotoMenu / Setup/ Service Setup/ xxxx /
Fullscan Replace Existing Services).