658079
13
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
13
ENGLISH
C Foot-operated remote control unit
for stepless welding current regula-
tion.
1) with 5 m leads, plastic shell
2) with 5 m leads, aluminium shell
3) with 10 m leads, aluminium
shell
D Hand-operated remote control unit
for stepless welding current regula-
tion.
1) with 5 m leads
2) with 10 m leads
E Welding return cable, 25 mm
2
, 3 m
F Welding cable, 16 mm
2
, 3 m
G Welding visor
1) helmet
2) automatic screen
A
Danger!
Repairs to power tools must be
carried out by qualified electricians
only!
Welding machines in need of repair can
be sent to the service centre of your
country. Refer to spare parts list for
address.
Please attach a description of the fault to
the power tool.
The machine's packaging can be 100 %
recycled.
Worn out power tools and accessories
contain considerable amounts of valua-
ble raw and rubber materials, which can
be recycled.
These instructions are printed on chlo-
rine-free bleached paper.
In case of faults, error messages are dis-
played on the display to help identify the
source of the error.
Simultaneously the Fault LED is perma-
nently lit.
E02
Excess transformer temperature.
The Excess temperature LED is lit.
DO NOT switch machine OFF,
in order for the fan to cool the
machine down faster.
If the temperature has fallen off to
normal levels, the display will show
the welding current again.
You may now continue welding.
E03
The lead to the transformer's tempera-
ture sensor may be broken.
E04
Possible short in the transformer's tem-
perature sensor lead.
E06
The machine's control has detected a
supply voltage of more than 20% below
the rated voltage.
To avoid excess primary currents the
machine shuts down.
3
Note:
This error message must be
acknowledged.
Turn the machine OFF for 5 sec-
onds, then ON again.
If the error message appears again, turn
OFF and contact a qualified electrician!
E12
The arc did not start within 20 sec after
pressing the torch button.
The machine shuts down.
Release torch button.
The message is cleared, the
machine is ready to operate again.
E14
Excess temperature of the primary sec-
tion.
E15
The lead to the primary section's temper-
ature sensor may be broken.
E16
Possible short in the primary section's
temperature sensor lead.
E17
Excess temperature of the secondary
section.
E18
The lead to the secondary section's tem-
perature sensor may be broken.
E19
Possible short in the secondary section's
temperature sensor lead.
8. Repairs
9. Environmental Protection
10. Faults
11. Trouble Shooting
Brittle or porous weld seam
Gas valve
closed?
Open gas valve.
Gas cylinder
empty?
Replace.
Unsuitable shield-
ing gas?
Use a suitable
shielding gas.
Gas line connec-
tion not tight?
Check connec-
tions.
Pressure regula-
tor faulty?
Check pressure
regulator.
Gas shroud on
torch or torch
leads blocked?
Clean gas shroud.
Air draft at weld-
ing spot?
Screen off weld-
ing spot or
increase gas flow
rate.
Workpiece not
clean?
Remove rust,
grease or paint
coating.
Steady gas flow
Solenoid valve
faulty or dirty?
Have solenoid
valve checked by
a qualified electri-
cian.
No welding current
Welding return
cable making
poor contact?
Check welding
return cable for
proper contact.
Control PCB
faulty?
Contact
service centre.
No function of machine
Supply circuit fuse
blown or cut-out?
Replace or turn
ON again.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo WIG 170 DC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo WIG 170 DC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info