625624
13
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
ENGLISH
13
ENG
8.1 Depth Stop Setting
Loosen the additional handle (15). Set depth stop
(7) to the desired drilling depth and retighten addi-
tional handle.
8.2 Switching On and Off
To start the machine, press the trigger switch (12).
The speed can be changed using the trigger
switch.
The electronic soft start means that the machine
accelerates continuously up to the pre-selected
speed.
For continuous operation the trigger switch can be
locked using the lock button (11). To stop the
machine, press the trigger switch again.
In continuous operation, the machine
continues running if it is forced out of your
hands. Therefore, always hold the machine with
both hands using the handles provided, stand in a
safe position and concentrate.
8.3 Speed preselection
(only applies for UHE 28 Plus)
Preset the optimum speed for the application
using the adjusting wheel (8).
8.4 Operating mode selection
Select the desired operating mode by turning the
switch button (13). To turn, push in the lock (14).
Twist drilling 1st gear
(high torque)
Only applies for UHE 28 Plus
Twist drilling 2nd gear
(high speed)
Hammer drilling
(only with use of SDS
chuck) (2)
Chiselling
(only with use of SDS
chuck) (2)
In chiselling mode, the chisel is locked so that it
cannot turn. To position the chisel for a particular
application, set the switch button (13) between
and .
When a chisel is fitted, only operate the
machine in the chiselling operating mode
.
Avoid levering with the machine when a
chisel is fitted.
8.5 Selection of direction of rotation
Do not activate the direction switch (10)
unless the motor has completely stopped.
Selecting the direction of rotation:
R = Clockwise
L = Anticlockwise
8.6 Drill chuck change
When changing chucks, make sure that the
spindle is clean. Apply a light coating of
grease to the spindle. (for information on special
grease, see Accessories section: order no.
6.31800)
Only attach the Metabo chuck provided.
Removing the chuck:
Turn chuck lock (5) as far as it will go (a) in the
direction indicated by the arrow, and remove
chuck (b).
Replacing the chuck:
Place chuck onto spindle (6) (a). Turn chuck lock
(5) in the direction indicated by the arrow (b) until
chuck slides fully onto the spindle. Then release
the chuck lock.
Check to see that the chuck is properly seated.
8Use
b
a
b
a
17026909_0608 UHE KHE 28 Plus KHE Partner Edition.book Seite 13 Dienstag, 17. Juni 2008 3:51 15
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo KHE Partner Edition bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo KHE Partner Edition in de taal/talen: Alle talen als bijlage per email.

De handleiding is 6,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info