594924
9
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
9
ENGLISH
Modification of the machine and use
of non-OEM parts or parts not tested
nor approved by the manufacturer
Defects and malfunctions
Noise
Contamination upon contact
Grounding and insulation
3.3Specific Safety Instruc-
tions
Lack of experience and expertise with
compound miter saws
Personal injury inflicted by track arm
holder and sawhead assembly
x Minimize the amount of wood dust
escaping from the machine and the
job site:
Remove dust deposits from the
work area. DO NOT BLOW THE
DUST AWAY WITH COM-
PRESSED AIR BECAUSE THIS
WILL ONLY SPREAD THE
DUST RATHER THAN REMOV-
ING IT.
Make sure the dust collector is
leak free and repair any leaks
immediately.
Keep your work area well venti-
lated at all times.
A DANGER
x Unauthorized changes and/or mod-
ifications affect machine safety and
are not allowed. The manufacturer
disclaims any liability for any dam-
age or injuries resulting from
changes or modifications or from
the use of non-OEM parts. The use
of any parts
not supplied or
approved by the manufacturer
voids the warranty of the machine.
A WARNING
x Follow all instructions given in this
manual strictly when you assem-
ble and start up the machine.
A DANGER
x Keep the machine and all accesso-
ries in good, clean and safe work-
ing condition. Strictly observe all
maintenance instructions contained
in this manual.
x Before every use of this machine
check for possible damage. Every
time you want to
use the machine
make sure that all safety devices
and protective guards are undam-
aged and fully operational.
x Check that all moving parts operate
smoothly and without jamming.
x Make sure that all parts and acces-
sories
are properly installed and
safely secured to ensure the safe
and trouble-free operation of the
machine.
A WARNING
x Any damaged parts or protection
devices must be replaced by fully
qualified and factory authorized
personnel only.
x Damaged switches may only be
replaced at a factory authorized
service center. For information on
the service center nearest you
,
refer to the information contained in
"Warranty Terms and Conditions"
at the beginning of this manual.
x NEVER OPERATE THE MACHINE
IF THE ON/OFF SWITCH IS DAM-
AGED!
x If the machine is not working prop-
erly, mark or tag it accordingly and
th
en move it to a safe place where
it cannot be used inadvertently, or
by unauthorized persons or any
children.
A WARNING
x Prevent hearing loss! Use ear pro-
tection. Always wear ANSI
approved ear protection such as
ear plugs or ear muffs.
A WARNING
x The insulation of power cords may
contain substances that are known
or suspected to cause cancer,
damage to reproductive organs
and/or the ability to procreate, and/
or may cause damage to fetuses
and unborn children.
Wash your hands
thoroughly with
soap and water every time after
touching the power cord.
A DANGER
x Fully insulated machines have a
special plug. Consult an electrician
if you do not have a matching out-
let.
x Do not tamper with the plug or the
outlet yourself. Consult a qualified
electrician for assistance.
A DANGER
A DANGER
x When using this machine, observe
the following safety instructions to
avoid the risk of personal injury or
property damage.
A WARNING
x PAY ATTENTION TO AND FOL-
LOW, WHERE APPLICABLE, ALL
SAFETY RULES AND REGULA-
TIONS, REGULATIONS FOR
ACCIDENT PREVENTION,
OCCUPATIONAL SAFETY AND
HEALTH ADMINISTRATION
(OSHA) RULES AND REGULA-
TIONS, ENVIRONMENTAL AND
ALL OTHER FEDERAL, STATE
AND LOCAL LAWS IN EFFECT
AT THE OPERATI
ON SITE, AS
THEY APPLY TO MITER SAWS.
x This machine shall only be oper-
ated by persons familiar with miter
saws, their operation and the spe-
cific risks associated with the oper-
ation of miter saws.
x Contact your supervisor,
instructor
or any other qualified individual in
case you lack substantial experi-
ence and expertise regarding the
operation of miter saws.
A WARNING
x Hold the handle firmly when you
start the cutting operation. The risk
of the sawhead being kicked up is
particularly high at the moment
when the saw blade makes its first
contact with the work piece.
x If you tilt th
e sawhead assembly to
the side, hold it at the handle and
keep your fingers away from the
track arm holder and out of its tilt-
ing range.
x Avoid lateral pressure on the saw-
head when making grooves. Use
clamps to firmly position your work
piece and secure it against acci-
dental movement.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo KGS 303 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo KGS 303 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 3,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info