594924
8
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
8
ENGLISH
Risk of injury by moving parts
Entanglement with the machine
Insufficient personal protection gear
Dust
x Before plugging the machine in,
check the voltage and cycle rating
(120 V, 60 Hz) on the nameplate of
the machine and make sure you
have a proper power source with
the same
rating. If not, consult a
qualified electrician for assistance.
x Be careful not to kink, squeeze or
pull the power cord and/or any
extension cord, and make sure that
you protect the cord(s) from dam-
age caused by rolling over
, heat,
aggressive substances like acid, or
other potential damage arising at
the work site.
x If the power cord or an extension
cord is damaged, never try to repair
it, but have a qualified electrician or
other auth
orized repair personnel
replace the damaged cord.
A CAUTION
x To avoid electrical shock, ensure
there is no contact with grounded
objects such as radiators, pipes,
ovens, refrigerators, etc. when
operating this machine.
x Ensure nobody can trip over or
inadvertently pull on the power
cord.
x Ne
ver pull on the power cord to
unplug the machine as this can
damage the cord and lead to a
hazard.
A DANGER
x Do not operate the machine with-
out installed guards.
x Make sure the power cord is
unplugged before servicing, trou-
bleshooting or changing parts.
x Remove all tools and loose parts
from the machine before plugg
ing
in and operating the machine after
service or troubleshooting.
x After completing a cut, do not let go
of the handle of the machine or
your work piece until all moving
parts of the machine have
come to
a full stop.
A WARNING
x When the machine is not in use,
switch it to OFF and unplug it.
A WARNING
x Make sure your work pieces are
secured in place during cutting so
that they cannot move.
x Work stock only in the direction
intended for the machine.
x Do not exert exessive force on the
machine with the work piece.
x Never have the machine running
unattended. Turn power OFF.
Don't leave the machine until it
comes to a full stop.
A DANGER
Be careful that no part of your body or
your clothing can be caught by and
pulled into the machine.
x Do not wear any loose clothing.
x Do not wear any gloves.
x Long hair has to be covered (for
example by
making a pony tail and
then tucking the hair in under a cap
or hat).
x Dangling jewelry, rings, bracelets,
necklaces and other personal items
which might get caught in the
machine have to be removed
b
efore starting to work with this
machine.
A WARNING
x Use eye protection. Always wear
ANSI approved impact safety gog-
gles. If you are producing metal fil-
ings or wood chips, wear a full face
shield.
x Use ear protection. Always wear
ANSI approved ear
protection such
as ear plugs or ear muffs.
x Use respiratory protection when
working around metal, wood, espe-
cially treated wood, chemical dusts
or mists. Always wear an ANSI
approved dust mask or respirator
or other respiratory protection in
accordance
with current OSHA,
MSHA and NIOSH regulations.
x Wear head protection if required by
your type of work or by regulations
applying to the job site.
x Wear protective, electrically non-
conductive clothes and non-skid
foot wear.
A WARNING
A CAUTION
x Wear suitable work clothes.
x When working outdoors wearing
of non-slip shoes is recom-
mended.
x Ensure a fire extinguisher is within
reach.
A DANGER
x DO NOT CUT ANY HAZARDOUS
MATERIALS OR MATERIALS
THAT CONTAIN HAZARDOUS
SUBSTANCES OR HAVE BEEN
TREATED WITH HAZARDOUS
SUBSTANCES.
A WARNING
x Some types of wood dust (e.g.
maple, oak, cedar) may cause
allergic reactions and other health
problems such as skin rashes, etc.
If possible, work with a suitable
dust collector connected to the
saw. The dust collector must com-
pl
y with the data stated in chapter
15, entitled "Technical Specifica-
tions".
x Dust generated by sawing, sand-
ing, drilling and similar work may
contain substances that are known
or suspected to cause cancer,
damage to reproductive organs
and/or the
ability to procreate, and/
or may cause damage to fetuses
and unborn children. Lead, lead
paint, arsenic or chromium treated
wood (often referred to as "green
wood" or pressure-treated lumber)
and quartz dust or silica from con-
crete are just some, but in no case
an e
xclusive list of such sub-
stances. The actual health risk
depends on the length of exposure
to these substances, the circum-
stances as well as the degree of
respiratory and other protection
used.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo KGS 303 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo KGS 303 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 3,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info