600601
5
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
5
ENGLISH
Align the materials as required and press firmly
together. After just a short time the joint is
completely functional.
Tips and tricks
For especially reliable results:
The parts to be bonded (or sealed or filled)
must be dry, absolutely clean, and completely
free of grease.
Apply the melted adhesive in dabs or stripes.
Do not attempt to spread it.
The parts to be bonded should be at room
temperature. Before applying melted adhesive
to any material that is cold (e.g. tiles, marble
etc.), such surfaces should be warmed up
(e.g. using a hot-air gun).
Before applying melted adhesive to any material
that is normally difficult to stick (e.g. rubber, metal,
certain plastics etc.), such surfaces should be
roughened up (e.g. using fine emery paper).
Rigid foam (e.g. expanded polystyrene) does
not pose a problem. Apply the melted adhesive
to the base surface and not to the polystyrene
itself. When sticking to smooth and/or cold
surfaces (e.g. metal), apply the melted
adhesive to the smooth/cold surface first.
When sticking more extensive surfaces use
only hot-melt adhesive with an open time of
longer than 20 seconds and always apply the
melted adhesive in large dabs.
When sticking textiles or similar materials,
apply the melted adhesive in wavy lines.
For sealing purposes apply the melted
adhesive in stripes on the area to be sealed.
The adhesive can then be spread and
smoothed out using a spatula.
Joints bonded using hot-melt adhesive can be
unstuck again simply by reheating.
Any superfluous adhesive left protruding can
be easily removed using a heated knife blade.
Unwanted drips of adhesive can best be
removed when cold.
During longish pauses when working with the
adhesive gun (i.e. more than 30 minutes)
withdraw the power plug from the mains socket
(the adhesive in the device might otherwise
spoil).
By applying only moderate pressure on the
trigger the amount of melted adhesive can be
dosed precisely. Excessive pressure, however,
may cause the glue stick to get wedged in the
gun and the feeder to become blocked. If this
happens, heat the gun for 10 minutes and pull
the stick out. If the glue stick is wedged too
deeply in the gun, heat up a new stick at the
front of the gun, allowing it to fuse together with
the wedged stick, and then carefully pull both
out together. Caution! Do not pull the stick all
the way out of the glue gun. Hot glue running
into the glue gun may cause damage.
Repairs
Repairs to power tools must be
carried out by a qualified electrician
only!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs.
For addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Environmental protection
Observe national regulations on environ-
mentally compatible disposal and on the
recycling of disused machines, packaging
and accessories.
Only for EU countries: Never dispose
of power tools in your household waste!
In accordance with European Guideline
2002/96/EC on used electronic and electric
equipment and its implementation in national
legal systems, used power tools must be
collected separately and handed in for
environmentally compatible recycling.
Technical specifications
Metabo hot-melt glue sticks:
11 mm dia., 45-200 mm long
Voltage: 100 -240 volts
Power: heating-up phase 200 W, idle phase
approx. 16 W
Heating-up time: approx. 6 minutes
Adhesive melting temperature: approx.
200°C, electronically controlled
Maximum output: 18 g/min.
Weight: 0.25 kg
Machine in protection class II
~ Alternating current
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo KE 3000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo KE 3000 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info