451403
15
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
The switch does not click in as long as the machine is not
connected to the electric mains. In case of a power cut
the switch will automatically be opened through a built-
in relay. This means that the saw has to be switched on
again after regaining power supply. In case of the motor
being overloaded, a built-in automatic circuit-breaker
will switch it off. Overloaded and thus overheated motors
should not be re-started until 10 minutes have passed.
Saws with alternating current have a built-in force driven
brake (braking motor) which is designed to prolong the
life of the saw. Brakes have to be changed when the
slowingdown effect is reduced and the stopping time
exceeds 10 seconds.
Please ask a specialized dealer. An ineffective break will
increase the danger of accidents!
6.4 Switch/Safeguard against overloading/Motor brake
7.2 Setting/Application of the protective hood
Set blade guard only with blade at complete standstill.
Danger of injury!
In case of through-cuts, longitudinal or across, the
protective hood must be fitted in a way that its distance
to the workpiece does not exceed 8 mm.
The protective hood must be fitted all the time, apart
from insertion- or concealed-cuts Para. 9.2 and 9.5 of
this manual. U.K. users see para. 6.5).
6.5 U.K. Industrial Use
Within the U.K., this machine falls under the Woodworking Machinery Regulations 1974, under which certain operations, e.g.
grooving, rebatting, tenoning and moulding are prohibited without special guards. For your own safety it is recommended to
follow the instructions given in the Health and Safety at Work booklet No. 41, entitled "Safety in the Use of Woodworking
Machines" and "A Guide to Woodworking Machinery Regulations" HS(R)9. Both publications are available from Her Majesty's
Stationary Office and other bookshops.
7 Operating/Setting
7.1 Setting the riving knife
- Before starting work, always pull the plug from the socket !
- The riving knife must be fitted all the time, apart from insertion (charging) cuts (point 9.3 of the operation instructions).
The riving knife has to be fixed so that the distance from the saw blade edge is not more than 10 mm radially, and 2 - 3 mm
in height.
- The riving knife prevents the locking of the kerf behind the saw blade and the jamming of the workpiece.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo BKH 400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo BKH 400 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 6,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info