451403
14
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
3 Technical Data
BKH 400/3,1 WNB BKH 450/5,5 DNB
Table size 1000x660 mm 1000x660 mm
Overall height 850 mm 850 mm
Cutting height 127 mm 140 mm
Motor speed 2800 min
-1
2800 min
-1
Cutting speed 58,5 m/s 66 m/s
Vertical adjustment 0-127 mm 20 - 140 mm
Motor power 3100 W 5500 W
Operating voltage 1~230 V 3~400 V
Supply frequency 50 Hz 50 Hz
Protection by fuse 1x16 A 3x16 A
Emissionswert
Emission value while operating DIN 45635
Idling speed 83,8 dB(A) 88,9 dB(A)
Operating 91,3 dB(A) 92,9 dB(A)
Noise emission value
Iding speed 94,7 98,1
Operating 99,0 101,1
Weight 90 kg 90 kg
Stock-No. 010 400 3109 010 450 5503
4 Standard delivery
Circular saw blade 400 x 2,2 or 450 x 2,5 , chrome steel
Riving Knife DIN 38820 , size 50 x 3
Sawblad guard
Ripping fence
Mitre fence
Lifting eyes
Push stick
Tools for mounting saw blade and riving knife
Manual / Operation instructions
- On saws with 230 V single-phase current the direction
of rotation does not have to be checked or changed.
- On saws with 400 V three-phase-current the direction
of rotation has to be checked through switching on the
saw briefly (max. 1 sec). To change the direction of
rotation, the two connecting pins can be turned from
the outside. In order to do this you have to pull the plug
from the socket and press both pins inside with a 6 mm
blade screw driver, and then turn them.
- The switch can be protected from unauthorized use
with a padlock.
6.3 Change of the Direction of Rotation of the saw blade
6.2 Mains supply
- A three-wire cable connection socket with an earthing contact is needed for the mains supply according to VDE 0100 for
the model BKH 400/3,1 .
- For model BKH 450/5,5 respectively a five-wire cable connection with a CEE plug-in device according to VDE 0100 is
needed.
- Only a rubber cable H 07 RN-F 3 x 1,5 or 5 x 1,5 may be used as an extension cord.
- The plug to which the machine is connected must match the VDE regulation 0100.
- If used on a construction site, the VDE regulation 0100 part 704 must be obeyed.
6 Putting into operation
6.1 Erection of the Machine
The machine must be firmly mounted at a flat and stable place. Tripping should be avoided.
5 Assembly
For transport purposes the saw blade guard is fixed under the table and has to be assembled.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo BKH 400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo BKH 400 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 6,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info