451400
8
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
ENG
8
GENERAL SAFETY INFORMATION
As with all power tools there is a certain amount of hazard
involved with the operator and his use of the machine.
Using the machine with the respect and caution
demanded as far as safety precautions are concerned
will considerably lessen the possibility of personal injury.
If, however, normal safety precautions are overlooked or
completely ignored, personal injury to the operator can
develop.
1. FOR YOUR OWN SAFETY READ AND UNDER-
STAND THIS INSTRUCTION MANUAL BEFORE
OPERATING THE SAW; Learn the saw's application
and limitations as well as the specific hazards peculiar
to it.
2. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets or other
jewellery which may get caught in moving parts of
the saw.
3. WEAR PROTECTIVE HAIR COVERING to contain
long hair.
4. WEAR SAFETY SHOES with non-slip soles.
5. WEAR SAFETY GLASSES. Everyday glasses have
only impact resistant lenses. They are no safety
glasses.
6. WEAR FACE MASK OR DUST MASK if operation
is dusty.
7. BE ALERT and think clearly. Never operate power
tools when tired, intoxicated or when taking
medications that cause drowsiness.
8. KEEP WORK AREA CLEAN. Cluttered work areas
and work benches invite accidents.
9. DO NOT USE POWER TOOLS IN DANGEROUS
ENVIRONMENTS. Do not use power tools in damp
or wet locations. Do not expose power tools to rain.
10. THE WORK AREA SHOULD BE PROPERLY
LIGHTED.
11. A PROPER ELECTRICAL OUTLET SHOULD BE
AVAILABLE for the machine. The plug should be
plugged directly into a properly grounded outlet.
12. EXTENSION CORDS MUST HAVE AN EARTH
LEAD and all three leads must be of the correct
cross section/gauge.
13. Keep visitors at a safe distance from the work area.
14. KEEP CHILDREN OUT OF THE WORKPLACE.
Make workshop childproof. Use padlocks, master
switches and remove starter keys to prevent any
unintentional use of power tools.
15. PERMANENTLY MOUNT YOUR BAND SAW before
performing cutting operations.
16. KEEP GUARDS IN PLACE and in working order.
17. MAKE ALL ADJUSTMENTS AND SET-UPS, such
as tilting the table or adjusting the blade guards and
blades guides, WITH THE POWER OFF.
18. ADJUST BLADE TENSION, upper and lower blades
guides, thrust bearings and blade tracking correctly.
19. DOORS AND BLADE GUARD must be in place and
securely fastened when performing saw operations.
20. SECURELY LOCK ALL ADJUSTABLE PARTS so
they can not loosen while sawing. This will prevent
distraction from sawing operations.
21. PLACE THE BLADE GUARD to within 5 mm above
the material to be cut.
22. USE THE PROPER BLADE TYPE AND SIZE for
the material being cut.
23. ALWAYS KEEP HANDS AND FINGERS AWAY
from the saw blade, especially at the end of a cut.
24. DO NOT OVERREACH. Keep proper footing and
balance.
25. HOLD MATERIAL FIRMLY and feed into the blade
at a moderate speed.
26. USE A PUSH STICK OR A PIECE OF SCRAP
WOOD to do the pushing and guiding when sawing
small pieces which require the fingers to be close to
the blade.
27. DO NOT SAW STOCK that does not have a flat
surface unless a suitable support is used.
28. ALWAYS STOP THE MACHINE before removing
scrap pieces from the table.
29. STOP THE MACHINE if the material is to be backed
out of an uncompleted cut.
30. WHEN SAWING CURVES, make relief cuts to allow
for removal of scrap material. This will help to
prevent undue twisting or bending of the saw blade.
The relief cuts are made before starting the curved
cut.
31. NEVER LEAVE A TOOL UNATTENDED. Turn the
power off and do not leave saw until it comes to a
complete stop.
32. DISCONNECT POWER. Turn switch off and
disconnect power whenever the band saw is not in
use.
Disclaimer
The information contained in this manual is intended to
make the owner/operator of this band saw familiar with
its set-up and the setting of cutting speeds, fences and
guards.
This is not a maintenance manual for servicing and
repair nor does it teach the operator how to become an
expert woodworker.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo BAS 500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo BAS 500 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 2,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info