494961
29
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
Tr o u b l e s h o o t i n g
2 5
Processor setup
I changed the output scanrate, but the processor did not register
the scanrate selection
Changing the output scanrate requires confirmation of the new output scanrate selection.
Do not select an output scanrate which exceeds display device capabilities (refer to display
device User’s Manual).
Enter the
SETUP MENU by pressing Menu on the IR remote for seven seconds
Front Panel LCD display will indicate
SET: NTSC SCANRATE and the current
RESOLUTION below
Press
< or > on the IR remote to select the appropriate output scanrate
Press
Store on the IR remote
Front Panel
LCD display will indicate ARE YOU SURE?
Press
Store to confirm resolution selection.
Note: Use the same procedure above during SET: PAL SCANRATE, if applicable
(International use)
I selected, SET: NTSC SCANRATE / 1920x1080, now there is no
video output.
The 1920x1080 output scanrate is a Progressive Format (67.43kHz), not a 1080i HDTV
Interlaced Format (33.75kHz). The display device must be capable of receiving this scanrate
(refer to display User’s Manual).
When utilizing the DVI OUTPUT, cable lengths to support 1920x1080p should be no
greater than 16ft (5m). Cable lengths longer than 16ft (5m) may require a DVI to Fibre
Optic connection. DVI cable lengths longer than 16ft (5m) may render an unstable image,
“sparkles” throughout the image, or no image at all.
Note: Some digital displays may have a physical pixel density of 1920x1080, but will not
display the actual 1920x1080p/60Hz signal received by the DVP-1080 processor. Example:
1920x1080, 24p/sF. Think of 24p/sF as an Interlaced signal, whereby, a Progressive HD
Segmented Frame is displayed as two individual frames (similar to 1080i), then spliced back
together; an Interlaced Format.
Is SET: NTSC SCANRATE / 1920x1080 an Interlaced or Progressive
video signal?
The 1920x1080 output scanrate selection is a Progressive Format signal (67.4KHz, 60Hz
refresh). Typically, only high resolution displays will accept/resolve this input signal, such as
9”CRT projection, or a digital display device with a native pixel density of 1920x1080.
Note: Some digital displays will have a physical pixel density of 1920x1080; however, may
not accept this input scanrate. If not, the image may either be split, or half the image is
present, or no image at all. Refer to display user’s manual for signal compatibility.
If the display does not accept 1920x1080 at 60Hz, then you must choose an alternate
resolution the display will understand, such as 1280x720 or 1920x540p (1080i equivalent).
Both output resolutions are perceived by the display as a DTV video signal.
WARNING
DAMAGE may occur if the output scanrate selected within the DVP-1080 SETUP MENU
exceeds theability of the display device to show the image.
My connection to the display device is analogue. Which SET:
ACTIVE OUTPUT format should I choose, RGB or YPrPb?
SET: ACTIVE OUTPUT / ANALOG RGB + DVI and SET: ACTIVE OUTPUT / ANALOG
RGB
When DVI is not available, the preferred analogue output selection from the DVP-1080 is
always RGB, intimating RGBHV. This produces the highest quality analogue signal, as the
processor will have pre-decoded the incoming video signal to its fundamental constituents
of Red, Green, Blue, horizontal sync/vertical sync.
SET: ACTIVE OUTPUT / ANALOG YPrPb
When DVI is not available, and display does not have either an RGBHV or 15-pin (VGA)
input connection, select SET: ACTIVE OUTPUT / ANALOG YPrPb from within the SETUP
MENU.
You must also select either SET: NTSC SCANRATE / 1280x720 or 1920x540 (1080i
equivalent), as these scanrates are the only valid Component video output formats which
the display will understand; both the 1280x720 and 1920x540 scanrates are recognized by
the display device as a DTV video signal.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Meridian DVP 1080 HD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Meridian DVP 1080 HD in de taal/talen: Engels als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info