494961
28
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
Tr o u b l e s h o o t i n g
2 4
My picture is Green.
YPrPb OUT into RGBHV IN = GREEN picture.
The BNC’s (RGBHV), or MONITOR output of the DVP-1080 is connected to the RGBHV, or
VGA input of the display device. However, SET: ACTIVE OUTPUT/ ANALOG YPrPb has been
incorrectly selected.
Enter the SETUP MENU by pressing
Menu on the IR remote for seven seconds.
Press the
A until the LCD display reads SET: ACTIVE OUTPUT / ANALOG YPrPb.
Press
< or > to select one of the following
SET: ACTIVE OUTPUT / ANALOG RGB + DVI
SET: ACTIVE OUTPUT / ANALOG RGB
Press Menu to return to the USER MENU
Or:
You have selected RGB on the IR remote; press YCrCb on the IR remote.
A Component HDTV (YPrPb) output format has been connected to the PASS-THRU
(VGA) input. However, the connection from the DVP-1080 to the display is via RGBHV
out or MONITOR out.
Connect the HDTV (YPrPb) output signal to the Component input on the DVP-1080
processor.
Connect a Component (YPrPb) to RGBHV Transcoder between the HDTV source and the
analogue PASS-THRU input on the DVP-1080 processor.
Note: A transcoder converts an analogue YPrPb signals into an RGBHV signal
Verify that the output/input cable(s) have not been swapped.
Verify continuity of cable terminations.
Connecting sources to the processor
Can the DVP-1080 process computer signals sent to the DVI
INPUT or PASS-THRU input?
No. The DVP-1080 will only route a digital or analogue computer signal directly to the
pass-through circuitry.
Analogue (VGA)
When an analogue computer source is connected to the PASS-THRU input, you must
connect an RGBHV cable to the display device. The processor will not convert an analogue
VGA signal to DVI; the display device must also be capable of the resolution selected on
the computer source.
Digital (DVI)
When a digital computer source is connected to the DVI INPUT, you must connect a DVI
cable to the display device. The processor will not convert a digital DVI computer source to
RGBHV; the display device must also be capable of the resolution selected on the computer
source.
There is no video from the DVI OUTPUT when the source is
connected to the PASS-THRU input
The D-15 PASS-THRU input will only route RGBHV or YPrPb (Component) signals to pass-
through via the ANALOG OUTPUTS of the DVP-1080 (Analogue IN = Analogue OUT). It is
always recommended to install both an RGBHV cable and a DVI cable to the display device
for system expandability.
If the display does not have an RGBHV, or D-15 (VGA) input connection, install a 3-wire
Component analogue cable to the display; however, only 480i, 480p, 720p and 1080i are
valid Component video signals.
There is no video from the ANALOG OUTPUTS when the source is
connected to the DVI INPUT
A DVI input signal that is HDCP encrypted will deactivate the ANALOG OUTPUTS. HDCP
encrypted signals can only connected to the display device using the DVI OUTPUT.
The DVI input originates from a computer source. All VESA computer resolutions are
sent directly to pass-through in the same format received (Digital IN = Digital OUT).
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Meridian DVP 1080 HD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Meridian DVP 1080 HD in de taal/talen: Engels als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info