657614
44
Verklein
Vergroot
Pagina terug
1/129
Pagina verder
44
a
b
c
d
I
In the case of hydraulic brakes and disc
brakes follow the instructions of the brake
manufacturer, which you can find on this
MERIDA CD-ROM. If you are in doubt or if you have
any questions, contact your MERIDA dealer.
Adjusting the tilt of the handlebars and brake
levers
The handlebars are usually slightly bent at the ends. Set
the handlebars to a position in which your wrists are re-
laxed and not turned too much outwards.
Release the Allen bolt(s) at the bottom or front side of
the stem. Turn the handlebars to the desired position.
Make sure the handlebars are accurately centered in the
stem
(a)
. Carefully retighten the bolt(s) with the torque
wrench.
Make sure the upper and lower clamping slots of the
stem are parallel and identical in width
(b)
. If you have
a stem with several bolts, tighten them evenly in a cross
pattern by using a torque wrench and observe the rec-
ommended torque values.
Try rotating the handlebars once clamped in the stem
(c)
and tighten the bolt a little more, if necessary. Use a
torque wrench and never exceed the maximum torque
values!
You find them directly on the components and/or in the
instructions of the component manufacturers on this
MERIDA CD-ROM.
If the handlebars are not tight with the prescribed torque
value, use carbon assembly paste.
After adjusting the handlebars you need to adjust the
brake lever/shifter units. Release the Allen bolt at either
unit. Turn the levers relative to the handlebars. Sit in the
saddle and place your fingers on the brake levers.
Check whether the back of your hand forms a straight
line with the line of your forearm
(d)
. Retighten the units
with a torque wrench and do a twist test! The brake le-
vers need not be absolutely tight. In case of a fall it is an
advantage when the brake levers can be turned.
G
Tighten the bolts at the stem until the clamp-
ing slots between the stem body and the
faceplate are parallel and identical in width
at the top and at the bottom. Tighten the bolts evenly
and in a cross pattern, i.e. alternately and gradually, by
using a torque wrench to the lower value of the recom-
mended torque values.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Merida-Pedelec

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Merida Pedelec bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Merida Pedelec in de taal/talen: Engels als bijlage per email.

De handleiding is 3,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info