657614
42
Verklein
Vergroot
Pagina terug
1/129
Pagina verder
42
a
b
c
d
G
Poorly tightened or loosening bolts can fail.
Risk of an accident!
G
Check the bolts by using a torque wrench
once a month according to the values indi-
cated directly on the components and/or in
the instructions of the component manufacturers on this
MERIDA CD-ROM.
Clamping with two bolts in line:
(a)
release both bolts
two to three turns counterclockwise, otherwise the
whole assembly can come apart. Move the saddle for-
ward or backward as desired to adjust the horizontal
position. You may have to give the saddle a light blow
to make it move. Please observe the markings on the
saddle rail.
Having found your preferred position, make sure both
clamp halves fit snugly around the saddle rails before
tightening the bolt(s) to the correct torque value as pre-
scribed by the seat post manufacturer.
Tighten both bolts evenly
(b)
so that the saddle remains
at the same angle. If you wish to lower the nose of the
saddle a little, tighten the front bolt clockwise. You might
have to loosen the rear bolt a little as well. To lower the
rear part of the saddle, the rear bolt has to be tightened
clockwise and the front bolt has to be released, if nec-
essary.
Check the strength while you press with your hands al-
ternate at the top and back of the saddle. The saddle
may not move
(c)
.
G
Poorly tightened or loosening bolts can fail.
Risk of an accident!
G
Check the bolts by using a torque wrench
once a month according to the values indi-
cated directly on the components and/or in
the instructions of the component manufacturers on this
MERIDA CD-ROM.
If you have a single bolt system
(d)
, unscrew the fixing
bolt as far as possible without loosening the lock nut on
the outer side of the clamping device. In general, it is not
necessary to take the mechanism completely apart, if
it is already equipped with the correct outer clamps for
your saddle.
If you do find it necessary to unscrew the single fixing
bolt completely, remove it from the clamping device.
This releases the outer clamping parts. The inner clamp-
ing parts are held in position with a rubber retention
plate.
Mount the saddle rails into the inner clamping parts, add
the outer parts and re-insert the fixing bolt. If the width
of the saddle rails does not fit exactly into the clamp
grooves, do not try to force them in.
42

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Merida-Pedelec

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Merida Pedelec bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Merida Pedelec in de taal/talen: Engels als bijlage per email.

De handleiding is 3,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info