#
To reduce the tire pressure: remove the
tire sealant bottle from the tire inflation com‐
pressor.
#
Insert the filler hose in the socket of the tire
inflation compressor and turn it a quarter
turn clockwise.
#
Press pressure release button C next to
manometer B.
#
When the tire pressure is correct, unscrew
the filling hose from the valve of the sealed
tire.
#
Screw the valve cap onto the valve of the
sealed tire.
#
Stow the tire sealant bottle and the tire infla‐
tion compressor.
#
Drive to the nearest qualified specialist work‐
shop and have the tire, tire sealant bottle
and filling hose replaced there.
Battery (vehicle)
Notes on the 12 V battery
&
WARNING Risk of an accident due to
work carried out incorrectly on the bat‐
tery
Work carried out incorrectly on the battery
can, for example, lead to a short circuit. This
can lead to function restrictions in safety-rel‐
evant systems, for example the lighting sys‐
tem, ABS (anti-lock braking system) or ESP
®
(Electronic Stability Program). The operating
safety of your vehicle may be restricted.
You could lose control of the vehicle in the
following situations:
R
when braking
R
in the event of abrupt steering maneuvers
and/or when the vehicle's speed is not
adapted to the road conditions
#
In the event of a short circuit or a simi‐
lar incident, contact a qualified special‐
ist workshop immediately.
#
Do not continue driving.
#
Always have work on the battery carried
out at a qualified specialist workshop.
R
Further information on ABS (/ page 161)
R
Further information on ESP
®
(/ page 161)
For safety reasons, Mercedes-Benz recommends
that you only use batteries which have been tes‐
ted and approved for your vehicle by Mercedes-
Benz. These batteries provide increased impact
protection to prevent vehicle occupants from
suffering acid burns should the battery be dam‐
aged in the event of an accident.
408
Breakdown assistance
