13
GB
3 Operating
The MPA massager is intended for the targeted treatment of tense muscles in
the upper and lower back areas and the hip area. The device uses innovative
compressed air technology for this. The massaging frequency in the four air
cushions can be set individually be selecting one of five compression times. A
particularly intensive and relaxing effect is achieved with this special high-
definition massage technology. The separate, optional vibration massage can
be set to five levels of intensity. Compressed air massage and vibration massage
can be used in combination or independently. A timer allows you to choose
between four operating times.
You can thus use the MPA massager to create your own individual massage
program.
Preparation
1. Place the massage cushion
on a high chair or seat. Make sure the posi-
tion is correct. The cables are at the bottom. If necessary, use the velcro fas-
teners at the back to fasten it to a suitable back of a chair.
2. Insert the power supply unit plug
into the connection
on the mas-
sage cushion
.
3. Plug in the power supply unit
. Ensure that the power supply is easily
accessible. The control unit
acknowledges this with a beep.
4. Seat yourself comfortably and familiarise yourself with the device functions.
Operating the unit
I/0 button
1. Press the I/0 button
to switch on the device. The device starts working
straight away with compressed air massage and vibration massage. The
lowest levels are set for the air massage frequency and vibration intensity.
The preset operating time of 15 minutes appears on the display
. The
LEDs above the three function buttons and the indication on the display
light up in red.
2. Press the VIBRATION button
to switch off the vibration massage func-
tion. The LED goes out. The compressed air massage remains in operation.
Press the AIR MASSAGE button
to switch off the air massage function.
The LED goes out. The vibration massage remains in operation.
3. Press the I/0 button
again to switch off the device. All LEDs and the
display’s illumination go out.
AIR MASSAGE button
1. Press the AIR MASSAGE button
to switch on the air massage function.
The device starts working straight away with the lowest air massage
frequency, i.e. with a compression time of 3 seconds. The massage effect
is generated by building up pressure and releasing it again in the four air
cushions
in the massage cushion.
3.2
Operation
3.1
How does the
MPA massager
work?
88933_MPA_Luft-Masskiss_WEST_Final.qxd:Massagegerät 19.10.2010 11:39 Uhr Seite 13
