The test has failed if the robotic lawnmower cannot
follow the guide wire all the way to the connection point
with the boundary wire. It is likely that the installation
has not been carried out in accordance with the
instructions in
Installation of the guide wire on page 18
.
Common errors are for instance that there is not enough
open space to the left of the guide wire as seen facing
the charging station or that the guide wire is not laid at
an angle on a steep slope. See
Laying and connecting
the guide wire on page 18
.
Rectify the installation and run a new test with
Calibrate
guide
.
3.16.7 Reset user settings
This function allows you to reset the robotic lawnmower
to factory default settings.
1. Select
Reset user settings
in the menu and press
OK
. Enter the correct PIN code and press
OK
.
3.16.8 About
The About menu displays information about the robotic
lawnmower’s serial number and different software
versions.
358 - 001 - 21.09.2017 Installation - 27
