•
Set time:
Enter the correct time and press
OK
to
exit.
•
Set date:
Enter correct date and press
OK
to exit.
•
Time format:
Place the cursor at the required time
format: 12h 24h. Press
OK
to exit.
•
Date format:
Place the cursor at the required date
format:
YYYY-MM-DD (year-month-day)
MM-DD-YYYY (month-day-year)
DD-MM-YYYY (day-month-year)
Exit by pressing
OK
.
3.16.3 Language
Set language with this function.
To select language: Place the cursor at the required
language and press
OK
.
3.16.4 Country
With this function you can select in what country the
robotic lawnmower will work.
Place the cursor at the required country and press
OK
.
3.16.5 Remote start, ROB R600
One important function with the guide wire is the
capacity to steer the robotic lawnmower to remote
garden areas when required. This function is very useful
in gardens where, for instance, the front and back are
joined by a narrow passage where the charging station
cannot be installed.
With this function activated, (any option other than
Never
is selected) the robotic lawnmower will follow the
guide wire from the charging station to the point where
the guide wire connects to the boundary wire. It begins
to mow when it reaches this point. How often it must
follow the guide wire from the charging station is
selected as a proportion of the total number of times it
leaves the charging station. At all other times, the
robotic lawnmower leaves the charging station in the
standard manner and starts to mow.
The following five options can be selected:
1.
Never
(0%)
2.
Rarely
(approx. 20%)
3.
Medium
(approx. 50%)
4.
Often
(approx. 80%)
5.
Always
(100%)
Select the percentage that corresponds to the size of the
remote area relative to the total working area. If the
remote area is for instance less than half of the total
working area, then
Rarely
should be selected. If the
remote area is for instance half of the total working area,
Medium
should be selected. Compare with the
examples in
Yard layout examples on page 30
The default setting is
Rarely
.
3.16.6 Calibrate guide, ROB R600
The
Calibrate guide
function allows you to test if the
robotic lawnmower can follow the guide wire out from
the charging station.
To test the guide wire:
1. Place the robotic lawnmower in the charging station.
2. Select
Calibrate guide
and press
OK
. The robotic
lawnmower will now leave the charging station, run a
calibration process in front of the charging station
and then follow the guide wire to the connection
point with the boundary wire and then start mowing.
3. Check that the robotic lawnmower can follow the
guide wire all the way to the connection point with
the boundary wire.
26 - Installation 358 - 001 - 21.09.2017
