769817
14
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
EN
14
If the device is not going to be used
for a prolonged period and before
storing it away, it is essential to
remove any remaining water from the
water tank (7) (see the “Cleaning the
Water Tank” chapter).
Store the device in a clean, dry place
so that it is protected and is out of the
reach of children and animals when it
is not in use.
Cleaning the Water Tank
To clean the water tank (7), it needs to be
removed from the device.
1. Make sure that the device is not con-
nected to the mains power.
2. Take the cover (10) off the main unit(5)
(Picture C).
3. Remove the splash guard (9) from the
water tank (Picture C).
4. Carefully detach the cables of the
ultrasonic atomisers(1) from the cable
guide (2) on the edge of the water
tank. Then remove the ultrasonic
atomisers from the mounts.
5. Remove the water tank from the main
unit (Picture D).
6. Pour away any remaining water.
7. Clean the water tank thoroughly with
a little detergent and warm water.
8. Completely dry the water tank.
9. Insert the water tank into the main
unit.
10. Insert the ultrasonic atomisers into
the mounts in the water tank and their
cables into the cable guide. When
you do this, make sure that the ultra-
sonic atomisers are fully inserted and
are fi tted straight.
11. Insert the splash guard into the water
tank and place the cover on the main
unit.
MAINTENANCE
The device must be kept operationally
ready. If a halogen lamp(11) or an ultra-
sonic atomiser (1) should be damaged,
they need to be replaced.
More replacement parts can
be purchased via the following
website:
www.dspro.de/kundenservice
Replacing a Halogen Lamp
Please Note: When you touch and insert
a new halogen lamp (11), use gloves or a
cloth so that you do not compromise the
way that the halogen lamp works.
1. Make sure that the device is not con-
nected to the mains power and has
cooled down completely.
2. Take the cover (10) off the main unit(5)
(Picture C).
3. Remove the splash guard (9) from the
water tank (Picture C).
4. Twist the halogen lamp anticlockwise
to release it and pull it out.
5. Insert a new halogen lamp into the
socket and twist it clockwise to fi x it
in place.
Replacing an Ultrasonic Atomiser
1. Make sure that the device is not con-
nected to the mains power and has
cooled down completely.
2. Take the cover (10) off the main unit(5)
(Picture C).
3. Remove the splash guard (9) from the
water tank (Picture C).
4. Carefully detach the cable of the
ultrasonic atomiser(1) from the cable
guide (2) on the edge of the water
tank (7). Then pull the ultrasonic
atomiser out of the mount.
5. Pull the cable out of the housing up
to the plug connection (PictureE).
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Maxxmee BG-E-0220 - 08827 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Maxxmee BG-E-0220 - 08827 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0.43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Maxxmee BG-E-0220 - 08827

Maxxmee BG-E-0220 - 08827 Aanvulling / aanpassing - Nederlands, Deutsch, English, Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info