769817
13
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Decorative Fireplace EN
13
4. Carefully ll the water tank with water
using a measuring cup or something
similar.
5. Place the splash guard on the water
tank and the cover on the main unit.
USE
Please Note!
The device must have clearance of at
least 1 m above it and to all sides and
be placed on a dry, even, solid and
moisture-resistant surface. Do not po-
sition the device near to moisture-sen-
sitive objects and materials. Harmful
microorganisms may be produced on
damp materials, such as curtains or
such like.
The water in the water tank needs
to be changed every two days and
the water tank needs to be cleaned
thoroughly in order to prevent the
formation of harmful microorganisms.
Only connect the device to a plug
socket that is properly installed and
matches the technical data of the
device. The plug socket must also be
readily accessible after connection so
that the connection to the mains can
quickly be isolated.
Only use the device when all halogen
lamps are inserted.
Do not operate the device unsuper-
vised so that you can intervene imme-
diately if there are any faults.
1. Fill the water tank (7) (see the “Filling
the Water Tank” chapter).
2. Fully unwind the connecting cable
and connect it to a plug socket.
3. Move the toggle switch (6) into theI
position.
4. Press the On / Off button (4) to switch
on the device. The halogen lamps (11)
start to light up. After around a min-
ute the ultrasonic atomisers(1) start
to produce a water mist. The device
requires a little time to produce a real-
istic fl ame pattern. The fl ame pattern
will develop as the device is used and
become increasingly more vivid.
To accelerate the fl ame develop-
ment, warm water (approx. 40 °C
to 60 °C) can be used.
Please Note: If there is not enough
water in the water tank, the device
switches off automatically.
5. If the device is no longer going to
be used, press the On / Off button
to switch it off. The halogen lamps
go out and the ultrasonic atomisers
switch off.
6. Move the toggle switch to the O posi-
tion and pull the connecting cable out
of the plug socket.
After use, there may still be water
remaining on the splash guard
and on the cover.
CLEANING AND STORAGE
Please Note!
The water tank needs to be emptied
and cleaned every two days.
Do not use any sharp or abrasive
cleaning agents or cleaning pads to
clean the device. They may damage
the surfaces.
Make sure that the device is not con-
nected to the mains power.
Wipe down the device with a soft,
damp cloth. Remove more stubborn
dirt with a little detergent.
If necessary, clean the diaphragms
of the ultrasonic atomisers (1) with a
cotton bud soaked in alcohol.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Maxxmee BG-E-0220 - 08827 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Maxxmee BG-E-0220 - 08827 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0.43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Maxxmee BG-E-0220 - 08827

Maxxmee BG-E-0220 - 08827 Aanvulling / aanpassing - Nederlands, Deutsch, English, Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info