4
7. TUNE
Press [Tune +] or [Tune -] to accurately correct the pitch from “-99” to “+99”. Pressing the two buttons simultaneously
resets pitch to the default value.
8. SINGLE CHORD
When rhythm is activated, press [Single]. After “SIN” shows on the display, you can play a single chord on the keys in the
chord zone of the keyboard. Press [Single] again, “SIN” will disappear from the display. The single chord function will be
disenabled.
9. FINGERED CHORD
In this mode, you play the individual notes of the chord with your left hand. Under the state that the rhythm is activated,
press [Fingered]. After the “FIN” shows on the display, you can play a fingered chord on the keys in the chord zone of the
keyboard. Press [Fingered] again, “FIN” will disappear from the display. The fingered chord function will be disenabled.
10. CHORD TIMBRE
Press [Chord Timbre] to change the tone (timbre) of the chord accompaniment. Press again to return to original timbre.
11. CHORD CLOSE
Press [Chord Close] to stop the chord.
12. METRONOME
There are 4 kinds of metronomes stored on the keyboard: 1/4 beat, 2/4 beat, 3/4 beat and 4/4 beat. Press [Metronome]
once to set the rhythm at 1/4 beat, twice for 2/4 beat, etc. press for fifth time to cancel function.
13. ONE-KEY TRAINING
Press [One Key] to enable the single key training function, “LEARN” will show on the display. Press [SONG] and then the
“+”/“-” buttons to select the song to be learned. One key training aims at duration learning, and there is no requirement on
pitch or creativeness. This mode allows for mistakes when playing the keys, but the keyboard still plays correct notes and
the display will show the correct notes. After one song is finished, repeat the current song to be learned. Press [Start/Stop]
or press the [One Key] button to disenable the training function.
14. FOLLOW TRAINING
Press [Follow] to enable the follow function, “LEARN” will show on the display. Press [SONG] and then the “+”/“-” buttons
to select the song to be learned. With [Follow] training, you can learn by following the correct playing notes. You can also
learn by following the notes shown on the display. The program will wait for you to play the correct note before it moves to
the next one. Notes: In this mode, the Keyboard plays only the correct notes and gives no response to the wrong notes.
Press [Start/Stop] or press [Follow] to disenable the training function.
15. ENSEMBLE TRAINING
Press [Ensemble] to enable the ensemble function, “LEARN” will show on the display. Press [SONG] and then the “+”/“-”
buttons to select the song to be learned. The Ensemble training aims at the correct and comprehensive learning of the
song duration and notes. The keynote will be shielded for ensemble and you need to play the correct note
according to the correct duration of the song. If you fail to play within 3 seconds, the keyboard will automatically play the
correct note. After one song is finished, repeat the current song to be learned. Press the [Start/Stop] button or press
[Ensemble] to disenable the training function.
16. DEMO ONE
This keyboard has stored 20 demo songs (“000” to “019”) for your selection. Press [DEMO ONE] to play one demo song in
repeat.
17. DEMO ALL
This keyboard has stored 20 demo songs (“000” to “019”) for your selection. Press [DEMO ALL] to play all available demo
song in sequence.
18. LCD DISPLAY
Displays current mode, notes to play, rhythm, tempo, etc.
19. TIMBRE
The keyboard provides 200 timbres (“000” to “199”) to select. When turning on the keyboard, the timbre selection function
will be turned on automatically. When in other modes, press the [TIMBRE] button to enable the function. “TONE” will show
on the display if successful. The timbre is defaulted to be “000”, and it can be adjusted by pressing the corresponding
number buttons or pressing the “+”/“-”button.
20. TOUCH
Press [TOUCH] to turn the touch function on or off. When turning the keyboard on, touch mode is default. The display
shows “Touch”. This function can help to enrich musical expression and correctly reflect the force you apply on the keys.
The larger the force, the louder the sound.
21. RHYTHM
Rhythm selection: This Keyboard provides 200 rhythms (“000” to “199”) for your selection. The rhythm is defaulted to be
“000”. Press [Rhythm], “RHYM” will show on the display. Press the numeric keys or the “+”/“-” buttons to select other
rhythms.
Rhythm enabling: Press [Start/Stop] to start accomp rhythm. While in enable state: Press [Sync], “SYN” will show on the
display. Play any key in the chord key zone (1st-19th key from left). The accomp rhythm will be activated. Press
[Start/Stop] to stop the accomp rhythm.
Interlude: After the accomp rhythm is activated, press [FILL-IN] to have a temporary rhythm play during the accomp
rhythm.
22. NUM PAD
Numeric keys to enter an accurate value.
23. SYNC
When in rhythm mode, press [Sync]. “SYN” will show on the display. Play any key in the chord key zone (the 1st-19th key,
from left) to activate the accomp rhythm.
24. START/STOP
Press to start or stop playing selected program.
