785623
8
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
8 EN / SCM20 & SCM40 PWM User’s Manual
2.6.1 Low voltage disconnect function
There are two ways to protect the battery from too deep
discharges:
Static: the Load output switches off if the battery
voltage drops below the Disconnect threshold voltage.
Dynamic: the Load output switches off depending on
both battery voltage and load current.
The Load output switches on again if the battery voltage
rises above the Reconnect threshold value.
The Low voltage disconnect function can only be used if
the load is connected to the Load output (see section 3.5)
Static Low voltage disconnect function:
Indication Disconnect
threshold Reconnect
threshold
10.8 / 21.6 10.8V / 21.6V 11.6 V / 23.2V
10.9 / 21.8 10.9V / 21.8V 11.7 V / 23.4V
11.0 / 22.0 11.0V / 22.0V 11.8 V / 23.6V
11.1 / 22.2 11.1V / 22.2V 11.9 V / 23.8V
11.2 / 22.4 11.2V / 22.4V 12.0 V / 24.0V
11.3 / 22.6 11.3V / 22.6V 12.1 V / 24.2V
11.4 / 22.8 11.4V / 22.8V 12.2 V / 24.4V
11.5 / 23.0 11.5V / 23.0V 12.3 V / 24.6V
11.6 / 23.2 11.6V / 23.2V 12.4 V / 24.8V
11.7 / 23.4 11.7V / 23.4V 12.5 V / 25.0V
11.8 / 23.6 11.8V / 23.6V 12.6 V / 25.2V
Dynamic Low voltage disconnect function:
Indication Disconnect threshold Reconnect
threshold
at full load at no load
11.0V
22.0V
11.6V
23.2V
12.4 V
24.8V
11.1V
22.2V
11.6V
23.2V
12.5 V
25.0V
11.2V
22.4V
11.6V
23.2V
12.6 V
25.2V
11.4V
22.8V
11.6V
23.2V
12.7 V
25.4V
11.6V
23.2V
11.6V
23.2V
12.8 V
25.6V
2.6.2 Battery type
Indication Battery type
Gel
Flooded (liquid)
AGM
2.6.3 Load mode
Indication Load mode
Always on Mode: the load output
is always switched on
Dusk to Dawn Mode: the load
output is switched on between
sunset and sunrise.
PV input threshold voltage:
5.0/10.0V
Evening Mode: The load output
will be switched on for 2~9 hours
after sunset.
Manual Mode. The load output
can be switched on and off
manually by pressing MENU
shortly.
NOTES:
You can test the operation of the Load output manually
by holding MENU pressed for 3 seconds. Press MENU
again to switch off the load again or the load will switch
off automatically after 1 minute.
If the Manual Load Mode is selected (“USE”), you can
switch on and off the Load output manually by pressing
MENU shortly. In this case the protections against fault
conditions for overload, short circuit, overheating or
under and over voltage will be ignored!
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mastervolt Solar ChargeMaster SCM20 PWM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mastervolt Solar ChargeMaster SCM20 PWM in de taal/talen: Engels als bijlage per email.

De handleiding is 0.73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info