785594
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
4
April 2016 / MasterBus – FireCAN Interface / EN
3.2 FIRECAN
In the FireCAN group on the configuration page you
can configure the FireCAN settings. When the “Auto”
checkbox (see figure 2 (a)) is activated the
configuration is done automatically. Otherwise the
configuration has to be done manually.
Use Auto configuration when you have a MasterBus
network with only one charging device
If you have more than one charger and want to
transmit information of all chargers you will need to
use one FireCAN interface for each charging device.
3.2.1 Auto configuration
In Auto configuration the FireCAN will find a
charging device on the MasterBus and set the
configuration parameters accordingly. Table 2.
shows all the possible charging devices.
Charging devices Article number
Mass Combi Ultra 12/3000 38013000
Mass Combi Ultra 24/3500 38023500
Mass Combi Ultra 48/3500 38043500
Mass Charger 24/15-2 40020156
Mass Charger 24/25-2 40020256
Mass Charger 24/25-2 DNV 40720266
Mass Charger 24/50-2 40020506
Mass Charger 24/75 40020756
Mass Charger 24/100 40021006
Mass Charger 24/50-3ph 40031010
Mass Charger 24/100-3ph 40031006
Mass Charger 48/25 40040256
Mass Charger 48/50 40040506
Serial interface with
Mass Combi 77030450
Combi interface with
Mass Combi 77030475
ChargeMaster 12/25-3 44010250
ChargeMaster 12/35-3 44010350
ChargeMaster 12/50-3 44010500
ChargeMaster 12/70-3 44010700
ChargeMaster 12/100-3 44011000
ChargeMaster 24/12-3 44020120
ChargeMaster 24/20-3 44020200
ChargeMaster 24/30-3 44020300
ChargeMaster 24/40-3 44020400
ChargeMaster 24/60-3 44020600
ChargeMaster 24/80-3 44020800
ChargeMaster 24/100-3 44021000
Table 2: Overview of charging devices recognized in
Auto mode
The configuration parameters can be viewed but not
changed in Auto mode. The automatic configuration
will always choose the default Node ID of 16 for the
FireCAN network. If you have more than one
charger and want to transmit information of all
chargers you will need to use a sequence of Node
ID’s on the FireCAN network..
A new charging device will be selected when the
selected device is not responding.
3.2.2 Manual configuration
In Manual configuration (“Auto” not activated) you
have to make all the configurations yourself.
The easiest way is to use MasterAdjust,
see Figure 2 for more details. Some data fields
require you to enter an index. See paragraph 3.5 on
getting this information from MasterAdjust.
A quick way of only configuraring 1 charger
in a Masterbus network with multiple
charging devices is;
1. Connect only one Charging device, by
removing the other devices from the
MasterBus.
2. Select Auto, and wait until the
configuration is automatically made
for the Charging Device.
3. Uncheck the Auto mode, which
prevents the FireCAN interface from
switching to another Charging Device.
4. Reconnect the other Charging
Devices.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mastervolt MasterBus FireCAN Interface bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mastervolt MasterBus FireCAN Interface in de taal/talen: Engels als bijlage per email.

De handleiding is 0.19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info