786811
7
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
7
3.4.2 MasterBus (optional)
The Mass Systemswitch is compatible with the MasterBus
network: a fully decentralized data network for
communication between Mastervolt devices such as the
inverter, battery charger, generator, batteries and many
more. See section 5 for details.
3.5 LOAD ON INVERTER MODE
The Short break output is transferred between the
generator input, shore input and inverter input, depending
on its availability. However, to prevent the generator from
an overload situation or to prevent the shore fuse from
tripping, the load that is connected to the Short break
output can be switched either manually or automatically
from the generator or shore power to the output of the
inverter. We call this the “load on inverter mode” or the
“force to inverter mode”.
When the load on inverter mode is switched OFF (figure
3), the Mass Systemswitch is in normal state. This means
that the Short break output is transferred between the
generator input, shore input and inverter input, depending
on the availability.
When the load on inverter mode is switched ON (figure 4),
power from the generator or the shore can no longer be
used to supply the Short break output. The Short break
output will only be supplied by the inverter. See the
manual of the remote operation panel to toggle the load on
inverter mode manually.
Figure 3: Load on inverter mode is OFF, while power from
the generator or the shore is available
Figure 4: Load on inverter mode is ON, while power from
the generator or the shore is available
3.6 AUTOMATIC LOAD ON INVERTER MODE
It is also possible to toggle the load on inverter mode
automatically. Then the load on inverter mode will be
switched ON when the current on the shore input or the
generator input exceeds a predefined set point. Then we
call it the automatic load on inverter mode” or the
automatic force to inverter mode”.
3.6.1 Traditional remote control panel
If a traditional remote control panel is applied, the
“automatic load on inverter mode” can be triggered by:
- The generator current (delayed)
- The shore current (not delayed)
To adjust the settings of the automatic load on inverter
mode refer to ADVANCED A-menu of the manual of the
remote operation panel.
3.6.2 MasterBus
If the Mass Systemswitch is controlled by MasterBus,
operation of the “automatic load on inverter mode” can be
programmed by means of an event-based command. See
section 6.3 for details. Refer to the manual of the
MasterBus remote panel for details about programming of
event-based commands.
3.6.3 Example
See figure 5. A coffee machine is switched on, causing an
extra load on the shore/generator. When the total load that
is connected to the shore or the generator exceeds its
maximum current level, first a time delay is triggered. After
this delay time the automatic load on inverter mode will be
activated: a part of the total load is switched from the
generator/ shore to the AC output of the inverter. When
the automatic load on inverter mode is activated, it is
switched off again when the adjusted time has elapsed.
Generator
or shore
Generator
or Power
Inverter
Short break
Generator
or shore
Generator
or Power
Inverter
Short break
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mastervolt Mass Systemswitch 16 kW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mastervolt Mass Systemswitch 16 kW in de taal/talen: Engels als bijlage per email.

De handleiding is 1.28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info