786811
5
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
5
3 HOW IT WORKS
3.1 SOURCE PRIORITY
The Mass Systemswitch switches the right AC power
source to the output(s). Therefore the Mass Systemswitch
is equipped with a source priority. If more than one AC
power source is available, the source with the highest
priority is switched to the output(s).
See figure 1. The generator input has the highest priority:
when generator power is available, all outputs (except the
inverter only output) are supplied by the generator. Power
on the shore input and/or the inverter input will be denied
even when they are available.
The shore input has the second priority. If there is no
generator power available, shore power will be transferred
to the power output and the short break output. Power on
the inverter input will be denied.
The lowest priority is assigned to the inverter. AC power
on the inverter input is transferred to the short break
output only when no other power source is available.
3.2 AC INPUTS
Three AC-sources can be connected to the Mass
Systemswitch:
Inverter power (IN3)
Shore power (IN2)
Generator power (IN1)
3.2.1 Only inverter power available
When there is no AC power available on the generator
input or the shore input, power from the inverter input is
transferred to the short break output only. The power
output and the generator only output are unavailable now.
The Mass Systemswitch is in a neutral state and
consumes no energy itself.
3.2.2 Shore power available
When there is no generator power available but AC power
is available on the shore input, the Mass Systemswitch will
supply both the power output and the Short break output
with AC power from the shore input. The generator only
output is unavailable now.
Figure 1: principle schematics of the Mass Systemswitch
3.2.3 Generator power available
When the generator is started, a control circuit samples its
output voltage and frequency. Only when both are within
allowed limits for approximately 10 seconds, the Mass
Systemswitch transfers the power from the generator input
to all outputs (except for the inverter only output).
Too low generator frequency and voltage may cause
damage to both the generator and the connected load.
Therefore AC power on the generator input is continuously
checked by a control circuit. If the generator frequency or
voltage is too low, generator power is immediately cut off
from the load.
The 10 seconds time delay provides an ‘easy start up’ for
the generator. This increases the generator’s lifetime.
3.3 AC OUTPUTS
The Mass Systemswitch has the following AC-outputs:
Inverter only output
Short break output
Power output
Generator only output
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mastervolt Mass Systemswitch 16 kW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mastervolt Mass Systemswitch 16 kW in de taal/talen: Engels als bijlage per email.

De handleiding is 1.28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info