705292
55
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
OWNER’S MANUAL
&
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
简体中文
FRONT PANEL FUNCTIONS
2 15 16 17 18 19 20 21 22
1. USB
Connect via USB to use CODE as a DAW interface, to play tracks from your music library,
to get rmware updates and control via MIDI.
ENGLISH
To record with CODE using your DAW:
• Connect to your computer via USB.
• Select your CODE amplier as the input
source on your computer and within
your DAW.
To stream audio from your computer
through CODE:
• Connect to your computer via USB.
• Select your CODE amplier as your
computer’s output source.
• Use the MASTER control to adjust the
volume level (#8 in this manual).
To get CODE rmware updates:
http://my.marshall.com/Downloads/
FirmwareUpdate
Follow this link to quickly and easily keep
your CODE amplier’s rmware up to date.
MIDI data:
• Your CODE amplier can also send and
receive MIDI data related to the front
panel controls via the USB.
2. INPUT
Use this jack socket to connect your
guitar to the amplier. Use a good quality
screened/shielded guitar cable to help
prevent noise interference.
3. GAIN
Controls the amount of GAIN introduced to
a Preset. The higher the GAIN, the harder
the preamp is driven.
4. BASS
Turning the BASS control will adjust the
warmth and low-end depth of your sound.
5. MIDDLE
Adjusting the MIDDLE control will vary the
amount of body in your sound by boosting
or cutting midrange frequencies.
6. TREBLE
Increasing the TREBLE will make your
sound brighter and more cutting. Turning
the TREBLE down will decrease tonal edge
and make the sound softer.
7. VOLUME
Controls the volume level within a selected
Preset.
Because GAIN, BASS, MIDDLE, TREBLE
& VOLUME are stored as part of a Preset,
these panel tone controls only become active
when they are used. This means that until
they are turned their position is not related to
their setting within a Preset. When you turn
a tone control it becomes active. The display
screen will show its current setting and the
stored setting.
When a GAIN, BASS, MIDDLE, TREBLE
or VOLUME control is activated the
EXIT/STORE LED will ash red to show that
the Preset’s stored settings have changed.
10 131 143 4 5 6 12
23 11
ENGLISH
!
!
7 8
9
FRONT PANEL FUNCTIONS (CONT.)
18. DEL (CONT.)
ENGLISH
Vintage
Vintage Delay recreates the sound of analogue delays. Vintage Delay’s editable
parameters are:
DELAY TYPES
PARAMETER VALUE RANGE DESCRIPTION
Time 0 - 4000 Controls the Delay repeat time in milliseconds.
Feedback 0 - 10 Adjusts the number of Delay repeats.
Age 0 - 10 Adjusts the amount ‘utter’ and higher frequency
roll-off for a more vintage sounding Delay
Level 0 - 10 Adjusts the volume level of the Delay effect.
A:>>|<<
Multi
Multi Delay adds a rhythmic repeat for more complex delay patterns. Multi Delay’s
editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Time 0 - 4000 Controls the Delay repeat time in milliseconds.
Feedback 0 - 10 Adjusts the number of Delay repeats.
Tap Pattern 1 - 4 Select from four different Delay repeat patterns
Level 0 - 10 Adjusts the volume level of the Delay effect.
Reverse
Reverse Delay’s repeats run backwards. This can add texture and an eerie quality to
your sound. Reverse Delay’s editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Time 0 - 4000 Controls the Delay repeat time in milliseconds.
Feedback 0 - 10 Adjusts the number of Delay repeats.
Frequency 0 - 10 Adjusts the amount of higher frequency content in the
Delay repeats
Mix 0 - 10 Adjusts the level of the Delay effect relative to the
unaffected signal. As the amount to Delay is increased,
the unaffected signal is decreased, and vice versa.
FRONT PANEL FUNCTIONS (CONT.)
The DEL Section Switch LED will ash in time to the current Delay time or tempo
when active.
A:>>|<<
ENGLISH
18. DEL (CONT.)
Tap Tempo
Set the Delay time by tapping the EDIT selector, or by tapping an assigned button on
the optional CODE footcontroller. This enables you to quickly and easily match the
Delay time with the tempo of the music you are playing.
To activate TAP TEMPO:
• Press MOD and DEL Section Switches together.
• The display screen will show the Delay time in milliseconds.
• Either turn the EDIT selector to select the delay time in milliseconds or tap it
repeatedly to nd your delay time or to match a tempo.
• Press EXIT/STORE once to exit TAP TEMPO and return to the main Preset screen.
DELAY TYPES
A:>>|<<
REVERB TYPES
Room
Room Reverb recreates the acoustic reections of small to larger rooms. Room
Reverb’s editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Decay 0 - 10 Controls how long the it takes for the reections to
fade.
Pre-delay 0 - 10 Adjusts the amount of time before the rst reection
is heard.
Tone 0 - 10 Adjusts the amount of higher frequency content in the
reections.
Level 0 - 10 Adjusts the level of the Reverb effect.
!
18. REV
REV is short for Reverb. Reverb FX in a conventional amplier setup can be in stompbox
form, rack form or integrated within an amplier. Your CODE’s Reverb FX are:
前面板功能(续上)
简体中文
17. MOD (调制效果器)
MOD 是调制的缩写。传统设备中的调制效果器可采用单块效果器或机架的形式,一般
通过放大器的效果回路连接:
调制效果器
A:>>|<<
参数 值范围 描述
Mode (模式) CLS VIB
经典合唱和颤音。
Speed (速度) 0 - 10
控制合唱或振音效果的速度。
Depth (深度) 0 - 10
调节合唱或振音效果的深度。
Tone (音色) 0 - 10
提高或降低声音中的高频和低频含量。
飘忽 (Flanger) 效果器
飘忽效果器可以产生类似于合唱的声音,但更生动,谐波更复杂。此效果器可产
生奇妙的声波纹理,例如喷气机多普勒效果器 (Doppler FX) 以及金属共振的嘶嘶
声。飘忽效果器的可编辑参数为:
参数 值范围 描述
Mode (模式) JET MET
喷气飘忽和金属飘忽。
Speed (速度) 0 - 10
控制飘忽效果的速度。
Depth (深度) 0 - 10
调节飘忽效果的深度。
Regeneraon
(再生)
0 - 10
调节反馈到效果器输入端的信号量,让飘忽效果更明
显。
参数 值范围 描述
Mode (模式) CLS VBE
经典相位和振音。
Speed (速度) 0 - 10
控制相位或振音效果的速度。
Depth (深度) 0 - 10
调节相位或振音效果的深度。
Regeneraon
(再生)
0 - 10
调节反馈到效果器输入端的信号量,让相位效果更明
显。
合唱 (Chorus) 效果器
合唱和振音效果器向吉他信号施加一个轻微的音调变化,让声音从柔和的起伏变为
激昂的颤动。此效果器可以增加清音的深度和宽度,让独奏变得更丰满。合唱效果
器的可编辑参数为:
相位 (Phaser) 效果器
相位效果器使用全通滤波器让吉他信号产生非常轻微的移位,根据原始信号对移位
或移相的信号进行调制可产生经典的相位声音 —— 非常适合节奏感强劲的歌曲、
扫弦声和增强音。相位效果器的可编辑参数为:
前面板功能(续上)
17. MOD (调制效果器)(续上)
简体中文
调制效果器
A:>>|<<
18. DEL (延迟效果器)
DEL 是延迟效果器的缩写。传统设备中的延迟效果器可采用单块效果器或机架的形式,
一般通过放大器的效果回路连接:当您选择延迟时,开关的 LED 指示灯将保持在红色发
亮状态两秒,然后开始闪烁,表示当前为延迟打拍。CODE 的延迟效果器包括:
录音室 (Studio) 延迟效果器
录音室延迟效果器是一条高保真的延迟线。它具有更长的延迟时间,您可以创建最
4 秒的分层循环音乐。录音室延迟效果器的可编辑参数为:
延迟效果器类型
参数 值范围 描述
Time (时间) 0 - 4000
控制延迟重复的时间(毫秒)。
Feedback
(反馈)
0 - 10
调节延迟重复的次数。
Frequency
(频率)
0 - 10
调节延迟重复中的高频含量。
Level (音量) 0 - 10
调节延迟效果的音量。
A:>>|<<
颤音 (Tremolo) 效果器
那种酷酷的颤音效果是通过上调和下调信号振幅实现的。颤音效果器可以产生从柔
和到重颤动的各种音色特性。颤音效果器的可编辑参数为:
参数 值范围 描述
Mode (模式) VLV SQR
电子管颤音和方波颤音。
Speed (速度) 0 - 10
控制颤音振荡的速度。
Depth (深度) 0 - 10
调节颤音效果的深度。
Skew (歪斜) -50 +50
调节执行振幅调制的波形的形状。跨越值范围的波形
状变化在复古与现代颤音之间移动。
55

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marshall Code 100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marshall Code 100 in de taal/talen: Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 13,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info