USER MANUAL IRRF7243™ MINI CONTROLLER
TABLE OF CONTENTS
INTRODUCTION………………………………………………………………………….…… 6
1.PROPERTIES
…………………………………………………………………………….…… 6
2. INSTALLATION MINI CONTROLLER
………………………………………………... 7
3. SET UP OF REMOTE CONTROL
…………………………………………………….. 7
3.1 Operate via keyboard Mini Controller
…………………………………….. 7
3.2 Operating with the help of your infrared (IR) remote control
……. 7
3.3 Control with the help of your RF remote control
……….................... 9
4. FREQENTLY ASKED QUESTIONS
…………………………………………............... 9
5. TECHNICAL DATA
……………………………………………...................................... 11
INTRODUCTION
Congratulated on buying the Marmitek X-10 IRRF7243 Mini Controller.
With the Mini Controller you can operate your lighting and apparatus
remotely. You can place the Mini Controller anywhere in the house where
there is a plug. For instance in the living room or on your bedside table. You
can switch on and off lighting and apparatus with your universal infrared
(X-10 compatible) remote control, your X-10 RF (high frequent wall and
floor penetrating) remote control or the keys of your Mini Controller. So you
can switch off your children’s radio remotely or switch off your TV or night
lamp in your bedroom. You can also switch on lighting, pressing one
button, when you hear a suspected noise in the night or you can switch off
all apparatus.
1. PROPERTIES
Marmitek X–10 commands can be given in different ways:
1. Directly with the built-in key board (inclusive ‘dim’, ‘all lights on’, and ‘all
units off’ commands. You can operate max. 8 ‘X-10’ modules then. See
chapter 3.1.
2. With a universal infrared remote control which is X–10 compatible.
Depending on model: One for All, Philips Pronto, Thomson, Marmitek
etc. See chapter 3 and 3.2.
3. With any Marmitek X–10 IRRF remote control. In this case the Mini
Controller works as a Transceiver. See chapter 3 and 3.3.
6© MARMITEK