6614
52
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
ENGLISH
50
NIGHT MODE
1.
Tap the Night on the remote control unit to
turn on the Night mode.
Setting the Night mode to ON compresses
the dynamic range in Dolby Digital only.
This softens loud passages such as sudden
explosions, to help prevent disturbing others
late at night.
2.
To turn off the Night mode, tap the Night again.
DIALOGUE NORMALIZATION
MESSAGE
Dialogue Normalization (Dial Norm) is a feature of
Dolby Digital.
When playing back software which has been
encoded in Dolby Digital, sometimes you may see
a brief message on the FL display which will read
"Dial Norm X dB" (X being a numeric value).
Dialogue Normalization serves to let you know if
the source material has been recorded at a higher
or lower level than usual. For example, if you see
the following message: "Dial Norm + 4 dB" on the
FL display, to keep the overall output level
constant just turn down the volume control by 4 dB.
In other words, the source material that you are
listening to has been recorded 4 dB louder than
usual.
If you do not see a message on the FL display,
then no adjustment of the volume control is
necessary.
RE-EQ
This menu is for turning THX Cinema Re-EQ on
and off. The tonal balance of a film soundtrack will
be excessively bright and harsh when played back
over audio equipment in the home. This is because
film soundtracks were designed to be played back
in large movie theater environments.
Activating the Cinema Re-EQ mode when
watching a film made for movie theaters corrects
this and restores the correct tonal balance.
Cinema Re-EQ is therefore not necessary for
material that was not designed for movie theaters
(for example, sports programming, television
shows, made for TV movies, etc.).
The Cinema Re-EQ mode can be activated only
while in Dolby Pro Logic mode, or while decoding
Dolby Digital or DTS-encoded material.
1.
Tap the Re EQ on the remote control unit to
turn on the Re-EQ mode.
2.
To turn off the Re-EQ mode, tap the Re EQ
again.
Note:
The Re-EQ mode can be selected from the OSD
menu system. (See page 41)
LIP.SYNC
Depending on the display component (TV, monitor,
projector, etc.) connected to the SR9600, a time lag
can occur between image signal processing and
audio signal processing. Though minor, this time
lag can interfere with movie and music enjoyment.
The Lip.Sync mode delays the audio signal with
respect to the image signal output from the SR9600
to correct the time lag between the sound and
image.
1.
Tap the A/V Amp and press the page up
button until page 5/8 is displayed. Tap the L-
Sync on the remote control unit.
2.
Select the time lag with the and cursor
buttons on the remote control unit.
The initial setting is OFF (0 ms). The time lag can
be adjusted in 10 ms increments up to 200 ms.
Watch the picture on the image device (e.g., TV,
monitor, projector, etc.) as you adjust the time lag.
Note:
The Lip.Sync mode is set to OFF (0 ms) in the
Pure Direct and Source Direct mode.
When the
Pure Direct (or Source Direct) mode is deactivated,
the previously set value of the Lip. Sync
mode
is
automatically restored.
5/8 A/V Amp
Mode
wed Jun 01 4:40
pm
1.
5/8 A/V Amp
Mode
wed Jun 01 4:40
pm
1.
5/8 A/V Amp
Mode
wed Jun 01 4:40
pm
1.
H
Ex
M
S
VOL
CH
OK
2.2.
SR9600U DFU_01_ENG 4_4 05.4.27, 5:47 PMPage 50 Adobe PageMaker 6.5J/PPC
52

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz SR-9600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz SR-9600 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info