GB
Door type: retractable up-and-over door,
Special 301 emergenev release, item no.: 564 452
Change the inside handle and a self-tapping screw 4,2 x 9,5, screw the thrust bearing (A) onto
the left-hand side of the lock case (B). With some door makes, the hole fixing the thrust bearing
to the lock case will still need drilling. Drill at a distance of 60 mm from above the centre of the
handle, usiing a 3,5 mm ø drill bit.
Shorten the bowden cable (if necessary) and secure to the thrust bearing with adjustiing
screw (C). Remove the screw nipple (D). Feed the cable through the cable through the drill hole
of the inside handel, and from underneath the handle push the screw nipple back onto the cable
and screw tight.
Fix the bowden cable (E) to the inside of the door leaf using two clamping ears (F).
Avoid taut wiindings.
Important:
Set the bowden cable with adjusting screw free from play.
O
4
Door Type: Industrial Doors (Sectional Doors),
Special 315 Emergency Release,
item no.: 46 007; 5 m long
item no.: 46 008; 6 m long
item no.: 46 009; 7 m long
item no.: 46 010; 8 m long
Push angle bracket (A) onto left locking bolt (B). Shorten the Bowden cable (if necessary) and
secure to the angle bracket with adjusting screw (C).
From behind insert the hexagon screw of screw nipple (D) through the drill hole of the locking
bolt and screw into the screw nipple. Pull the Bowden cable wire through the screw nipple and
screw tight.
With some door makes, the hole in the locking bolt will require drilling.
Drill at a distance of 48 mm from the left edge of the lock case, using a 5.5 mm Ø drill bit.
Fix the Bowden cable to door connector attachment (F) using one clamping ear (E) and to centre
hinges (G) using further clamping ears. Choose the shortest distance from the carriage to the
door lock, avoiding overtaut windings.
For securing the Bowden cable to the door sections, the supplied nylon binders and adhesive
clips can be used in addition to the clamping ears.
Attention:
Set the Bowden cable with the adjusting screw so that the angle bracket fits snugly
against the lock case!
O
5
