Handleiding Makita VC3211H (pagina 9 van 68) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens)

598797

Verklein

Vergroot

Pagina terug

1/68

Pagina verder

NOTICE:

• Do not apply an excessive force on the base hook. The

excessive force on the base hook may damage the

base hook. Close the base hook when not in use.

Opening the base hook allows the following usage.

1. Storing the power supply cord (Fig. 5)

NOTICE:

• Do not use the cleaner or a connected electric

power tool with a power supply cord wound on the

base hook. Using the cleaner or the connected electric

power tool with power supply cord may cause damage

the power supply cord.

2. Storing the front cuffs (Fig. 6)

Front cuffs 22, 24 and 38 can be stored (up to two at a

time.)

3. Storing the hose (Fig. 7)

4. Resting a reasonable size of electric power tool

for the base hook, such as circular saw. (Fig. 8)

Locking or unlocking the caster (Fig. 9)

To lock the caster with a stopper, lower the stopper lever

and the caster no longer will rotate. To release the caster

from the locked position, raise the stopper lever.

Locking the caster is convenient when storing the cleaner,

stopping the work on the way and keeping the cleaner

still.

To operate the stopper, move it by hand.

NOTICE:

• When moving the cleaner, make sure that the caster is

unlocked. Moving the cleaner with the caster in the

locked position may cause damage to the caster.

Cap

There is a cap on the mounting port. The cap prevents the

vacuumed dust from getting out from the cleaner.

ASSEMBLY

WARNING:

• This unit may contain hazardous dust. When replacing

filter elements and dust bag, always use a P2-

respirator.

• Always be sure that the cleaner is switched off and

unplugged before carrying out any work on the cleaner.

• Never switch on until all filters and dust bag are

completely installed and the volume flow control is

tested.

Warning sticker (Fig. 10)

Put the warning sticker of your language in the frame of

warning label on the cleaner.

Installing and disposing the filter bag

WARNING:

• Always use a P2-respirator.

• When using the filter bag, also use the air filter together

that is preinstalled on the tool. Failure to use the air

filter together may cause unusual noise and heat,

resulting in a fire.

CAUTION:

• Never pick up water or other liquids or wet dusts when

using the filter bag. Picking up such things may cause

the filter bag breakage.

1. Extend the filter bag. (Fig. 11)

2. Align the filter bag opening with the dust suction

opening of the cleaner. (Fig. 12)

3. Insert the cardboard of the filter bag onto the tool so

that it is positioned at the end beyond the detent

protrusion.

When disposing the filter bag, pull the edge on the filter

bag’s mouth so that the mouth is closed by a paper.

Connecting a hose

CAUTION:

• Never force the hose for bending or stamp it. Never

move the cleaner by a hose. Forcing, stamping and

pulling the hose may cause a breakage or deformation

of the hose.

• When picking up large wastes such as planer carvings,

concrete dusts or similar other than small wastes, use

the 38 mm inner diameter hose (optional accessory).

Using the 28 mm inner diameter hose may cause a

hose stuffing and damage.

• Always put the cap on the mounting port whenever you

remove the hose from the tool. (Fig. 13)

Remove the cap from the mounting port. You can place

the cap in multi-hook while the hose is connected to the

tool.

Insert the hose onto the mounting port of the tank and turn

it clockwise until it locks. (Fig. 14)

OPERATION

WARNING:

• Always use a P2-respirator.

CAUTION:

• If foam or liquid escapes from the tool, switch off

immediately. Continuing to using in this condition may

cause an electric shock and breakage of the cleaner.

MAINTENANCE

WARNING:

• Always use a P2-respirator during performing

maintenance.

• Never reuse the air filter after removal of the machine.

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

• Please check with your local authorities for any

regulations regarding the use of these vacuum

cleaners when working with toxic materials such as

Asbestos.

• Before any repair or maintenance always check what

materials the vacuum cleaner has been working with. If

in doubt, always have professionally cleaned by

licensed asbestos / toxic cleaning company before

conducting any repair or maintenance.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Makita VC3211H Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info