Handleiding Makita VC3211H (pagina 10 van 68) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens)

598797

Verklein

Vergroot

Pagina terug

1/68

Pagina verder

• A technical inspection, including inspection of filters, air

tightness, and control mechanism, must be performed

by an instructed person at least once a year, or more

frequently as may be specified by national

requirements.

• During maintenance, all contaminated items which

cannot be satisfactorily cleaned must be disposed.

Such items must be disposed of in impervious bags

which accord with your country’s regulations.

• After the operation in the hazardous area, the outside

of the tool must be decontaminated by vacuum

cleaning methods and wiped clean or treated with

sealant before you take the tool out of a hazardous

area. All the parts of the tool must be regarded as

contaminated when removed from the hazardous area,

and appropriate action must be taken to prevent dust

dispersal.

• Change the air filter when the air filter is clogged with

dust or you feel that the cleaner’s performance

declined.

• Check the filters periodically. If there is a tear on it,

replace it immediately.

Removing the air filter

CAUTION:

• Wait for about 5 minutes so that dust in the tank

completely settles down.

• Make sure that the tool is unplugged.

• Be careful not to let the dust enter inside the tank cover

when removing the air filter.

Unhook the tank cover and remove it carefully. Put it up

side down. (Fig. 15)

Remove the screw on the stopper lever.

Unlock the filter hooks by flipping the stopper lever.

(Fig. 16)

Cover the air filters with a plastic bag. (Fig. 17)

Remove the air filters from the tank cover carefully and tie

the plastic bag firmly. (Fig. 18)

Assembling the air filter

When you get the air filter components separately,

assemble them as follows.

Put the prefilter over the powder filter. (Fig. 19)

Make sure that the borders of prefilter and powder filter

are set properly. (Fig. 20)

Installing the air filter (Fig. 21)

Wipe off the seal face.

Set the new air filters and fix them with the filter hooks.

Flip the stopper lever to lock the air filters.

Lock the filter hooks with the screws.

Set the tank cover onto the tank and lock it with hooks.

NOTICE:

• Make sure the hooks on the filters are set at the correct

position. (Fig. 22)

Cleaning the level sensors (Fig. 23)

The level sensors detect liquid when the tank becomes

full with liquid. Clean the level sensors with a soft cloth

from time to time when changing the air filters.

Storage of power supply cord (Fig. 24 &

25)

Wind up the power supply cord around the multi-hook or

the base hook.

Storage of accessories

NOTE:

• Do not apply an excessive force to the accessories that

are held by the pipe holder. Applying an excessive

force to these accessories may cause damage to the

pipe holder.

Pipe rest can be used to store straight pipe, bent pipe and

others by just inserting these accessories. (Fig. 26)

The pipes can be placed into the pipe holder when also

stopping using the cleaner on the way for a while.

(Fig. 27)

You can place the cap in multi-hook while the hose is

connected to the tool. (Fig. 28)

Storage of hose (Fig. 29 & 7)

The hose can be placed on either base hook or multi-

hook.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

•Hose

• Front cuffs (22, 24, 38)

• Straight pipe

• Corner nozzle

• Round brush

• Powder filter

• Damper

• Prefilter

• Nozzle assembly

• Bent pipe

•Filter bag

• Hose band

• Belt hook complete

•Cap

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ from

country to country.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Makita VC3211H Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info