690556
8
Verklein
Vergroot
Pagina terug
1/168
Pagina verder
8
Use only outdoor rated extension leads that are so
marked. Keep the extension cord away from heat, oil
and sharp edges.
Ensure that the extension lead is secured in a manner
that prevents it from disconnecting from the plug whilst
in use.
Keep all the air intakes and the blower tube free of dust,
lint, hair and other material that may cause a reduction
in air ow.
Keep a balanced and stable stance while using the
tool.
Do not switch on the tool in enclosed or poorly ventilated
spaces or in the presence of ammable and/or explo-
sive substance such as liquids, gases and powders.
Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
tool when you are tired, sick or under the inuence of
alcohol or other drugs.
Do not operate this tool with long loose hair or loose
tting jewellery. Tie long loose hair back and remove
loose tting jewellery.
Do not allow the tool to pick up any burning or smolder-
ing materials like ashes, cigarette butts etc.
Do not attempt to pick up breakable objects like glass,
plastics, china etc.
Do not use in mulching operation without the collection
bag tted.
Do not use the tool in either the mulcher or the blower
mode on gravel surfaces.
Only operate the tool during broad daylight or with
adequate articial light.
When the tool is not in use, store it in a dry place and
out of reach of children.
After use, disconnect the tool from the power supply and
inspect for wear and damage. If you have the slightest
doubts, contact an authorized service centre.
Only use the tool according to the instructions given in
this manual.
Check regularly that screws are tight.
Use only spare parts and accessories recommended by
the manufacture.
Do not try to repair the tool or access internal parts.
Contact authorized service centers only.
It is recommended that the tool should be used with a
Residual Current Device (RCD) with a tripping current
of no more than 30 mA.
ASSEMBLY
UNPACKING
Carefully remove the product and any accessories from
the box.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call your
Makita service centre for assistance.
The tool is supplied with some components not as-
sembled. To assemble them, proceed as follows:
WARNING:
To prevent serious personal injury, make sure the switch
is in the OFF position, it is unplugged, and the impellers
have stopped before attaching or removing tubes.
ASSEMBLE AS A BLOWER (Fig. 3)
Slide blower tube forward until the notched areas on the
blower housing click into the slots on the tube.
ASSEMBLE AS A MULCHER (optional accessory)
(Fig. 2)
Slide the front and rear mulcher tubes together until
locked. (See Fig. 2.)
Loosen the thumb screw and open the mulching gate.
(See Fig. 2.1.)
Insert the wedge part of the mulcher tube into the
pocket. (See Fig. 2.2.) Fix the mulcher tube by
tightening the thumb screw. (See Fig. 2.3.)
To remove mulcher tubes, follow the steps above in
reverse.
Insert the bag adaptor into the blower outlet. Lock the
bag adaptor with the lock button. To remove the bag,
simply press lock button and remove bag. (See Fig. 4.)
NOTE:
It may be necessary to remove the blower tube or
mulcher tubes to clear a blocked tube or impeller.
INSTALLING BAG WITH SHOULDER STRAP
(Fig. 4)
While standing in the operating position adjust the
length to t the operator’s size. Pull the tab to lengthen,
pull the strap to shorten.
OPERATION
CONNECTING THE POWER CORD (Fig. 5)
Secure the extension cord to the motor housing using
the cord retainer. This prevents accidental removal of
the electrical cord.
Connect the female end of the extension cord with the
plug of the unit.
STARTING/STOPPING THE BLOWER/MULCHER
(Fig. 6)
To turn on, slide the power/speed slide switch. ‘1’
indicates the tool runs at slow speed, and ‘2’ at high
speed.
To turn off, slide the switch to ‘0’.
IMPORTANT:
While in mulching mode (optional accessory) the blower
MUST be in high speed position.
HOLDING THE TOOL
Before operating the unit, stand in the operating position.
Check for the following:
Wear proper clothing, such as boots, safety glasses or
goggles, ear/hearing protection, gloves, long pants and
a long sleeve shirt.
WARNING:
To avoid serious personal injury, wear goggles or safety
glasses that comply with EN 166 or ANSI Z87.1 at all
times when operating this unit. Wear a face mask or
dust mask in dusty locations.
WARNING:
To prevent serious personal injury or damage to the
unit, make sure the blower tube or the mulcher tubes
and the bag are in place before operating the unit.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita UB0801 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita UB0801 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info