690556
7
Verklein
Vergroot
Pagina terug
1/168
Pagina verder
7
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authority or retailer for recycling
advice.
Double insulation
SAFETY WARNINGS
1. Important safety instruction
Please read all of the safety and operating instructions
carefully before using this product. Please pay particular
attention to all sections of this operator manual that
carry warning symbols and notices. Failure to follow the
warnings and instructions may result in electric shock,
burn, and/or serious injury.
This tool is intended for blowing and mulching. Never
use the tool other than its intended use, such as inat-
ing balloons.
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Save all warning and instructions for future reference.
2. Training
Read the instructions carefully. Be familiar with the
controls and the proper use of the tool.
Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions
to use the blower. Local regulations may restrict the age
of the operator.
Never operate the tool while people, especially children,
or pets are nearby.
The operator or user is responsible for accidents or
hazards occurring to other people or their property.
3. Preparation
While operating the tool, always wear substantial
footwear and long trousers.
Dress properly - Do not wear loose clothing or jewel-
lery. They can be caught in moving parts. Use of sturdy
gloves and substantial footwear is recommended when
working outdoors.
Wear protective hair covering to contain long hair. Wear
protective goggles while operating.
To prevent dust irritation the wearing of a face mask is
recommended.
Before using, check the supply and extension cord for
signs of damage and aging. Do not use the tool if the
cord is damaged or worn.
Never operate the tool with defective guards or shields,
or without safety devices, for example collection bag in
place.
Only use a weather proof extension cable correctly
rated to your machine.
4. Operation
Always direct the cable to the rear away from the tool.
If the cord becomes damaged during use, disconnect
the cord from the supply immediately. DO NOT TOUCH
THE CORD BEFORE DISCONNECTING FROM THE
SUPPLY. Do not use the tool if the cord is damaged
or worn.
Do not carry the tool by the cable.
Avoid Dangerous Environment - Don’t use the tool in
damp or wet locations.
Disconnect the tool from the mains supply:
– whenever you leave the tool.
– before clearing a blockage.
– before checking, cleaning or working on the tool.
Switch off the tool immediately, disconnect the tool
from the mains supply and inspect for obstructions or
damage to the unit:
after striking a foreign object.
– if the tool starts to vibrate abnormally.
Operate the tool only in daylight or in good articial light.
Do not overreach and keep your balance at all times.
Always be sure of your footing on slopes.
Walk, never run.
Keep all cooling air inlets clear of debris.
Never blow debris in the direction of bystanders.
The tool should be supplied via a residual device with a
tripping current of not more than 30 mA.
5. Maintenance and storage
Before servicing, inspection, or storage, or to change an
accessory, switch off the tool, remove the plug from the
mains and wait until all moving parts stop completely.
Cool down the tool before making any inspections,
adjustments, etc. Maintain the blower with care and
keep it clean.
Keep all nuts, bolts and screw tight to be sure the tool is
in safe working condition.
Check the tool frequently for wear or deterioration.
Replace worn or damaged parts.
Use only genuine replacement parts and accessories.
Store Idle Tools Indoors - When not in use, tools should
be stored indoors in dry, and high or locked-up place
- out of reach of children.
6. Additional safety rules for blower / mulcher
Always wear adequate protective clothing when
operating the tool to avoid injuries to face, eyes, hands,
feet, head or hearing. Use safety glasses or a face
shield, high boots or sturdy shoes, long trousers, work
gloves, a hard hat and ear defenders.
Do not start the tool when it is upside down or when it is
not in the operating position.
Switch the motor off and disconnect from power when
the tool is not being used, left unattended, being
cleaned, being moved from one place to another or
when the extension cord is entangled or damaged.
Do not operate the tool near people, especially children
or pets. Turn it off if they get too close. Maintain a safe
distance of at least 5 m from other people when using
the tool.
Never direct the blower tube towards bystanders or
pets. Never blow debris in the direction of bystanders
or pets. The operator is responsible for accidents or
hazards occurring to other people or their property.
Do not handle the plug or the tool with wet hands and
do not use the tool in the rain.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita UB0801 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita UB0801 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info